Table of Contents
Advertisement
9.2 Getting Ready
enabled after the [Apply] button is clicked, then the [Reset] button
next to "NIC and Printer Controller Reset" on the "System" tab is
clicked after the message "Update Successful" has appeared.
"Network" tab
TCP/IP Configuration
TCP/IP Configuration
Function
IP Address
Subnet Mask
Default Gateway
Base Port Number
DHCP (APIPA)
IP Address in NVRAM
Description
This function is used to specify the IP address for the copier.
This function is used to specify the subnet mask used to access
the network.
This function is used to specify the default gateway used to
access the network.
This function is used to specify the port number for RAW
printing.
Select this function if the IP address is automatically assigned
by a DHCP server or APIPA.
Select this function if a fixed IP address is used.
9
9-33
Advertisement
Table of Contents
