When Incorrect Copies Are Produced - NEC NEFAX 671 User Manual

8
8.9

When Incorrect Copies Are Produced

* If the problem is not corrected even after the operations described above are performed, contact your
service representative.
Symptom
The printed output is too light.
The printed output is too dark.
The printed output is blurry.
8-26
8.9 When Incorrect Copies Are Produced
Possible Cause
The density level for the Auto
setting is set to "LIGHT".
The density level is set to
"LIGHT".
Does the message "TONER
EMPTY" or "TONER NEAR
EMPTY" appear in the Display?
The paper is damp.
The density level for the Auto
setting is set to "DARK".
The density level is set to
"DARK".
The Original Glass surface is
dirty.
The original is not held tightly
against the Original Glass.
The paper is damp.
Action
Adjust the setting for DENSITY
LEVEL (A) in the Utility mode.
(p. 7-25)
Otherwise, cancel the "Auto"
density setting, and then
manually select the desired
density setting. (p. 4-11)
Press the [Ö ] key, and then
select a darker print density.
(p. 4-11)
Change the Toner Cartridge
with a new one. (p. 8-6)
Change the paper.
Adjust the setting for DENSITY
LEVEL (A) in the Utility mode.
(p. 7-25)
Otherwise, cancel the "Auto"
density setting, and then
manually select the desired
density setting. (p. 4-11)
Press the [ ] key, and then
select a lighter print density.
(p. 4-11)
Wipe the Original Glass clean
with a soft, dry cloth.
Place the original in position so
that it is held tightly against the
Original Glass.
Change the paper.