Table of Contents
Advertisement
Administrator Setup
Menu Copy (Copy to USB)
Use this function to copy menu settings on this recorder to
another recorder.
1. Connect a USB memory device to this recorder.
2. Select [Service] – [Operations] – [Menu Copy
(Copy to USB)], and press the [
confirm the entry.
A confirmation dialog box appears.
3. Select [OK], and press the [
confirm the entry.
*
1 The configuration file is the file with the ".CFG" extension. The
configuration file contains all information set on this recorder.
However, the following data are excluded.
•
Recorder Operating Time
•
Fan Operating Time
•
CAMERA 1 Operating Time
•
Remote Control Panel Operating Time
(continued)
] button to
] button to
Menu Copy (Copy to Recorder)
Use this function to copy menu settings stored on a USB
memory device to this recorder.
1. Connect a USB memory device to this recorder.
2. Select [Service] – [Operations] – [Menu Copy
(Copy to Recorder)], and press the [
to confirm the entry.
A confirmation dialog box appears.
3. Select [OK], and press the [
confirm the entry.
Menu settings are copied from a USB memory device.
Note:
The following lamp states indicate that an error has
occurred.
[BUSY] lamp fast blinking:
This indicates that an error occurred during configuration
*
file
check or administrator authentication.
1
•
If a configuration file
are probable causes.
- The configuration file is missing.
- There are multiple configuration files.
- The configuration file is corrupted.
•
If an administrator authentication error occurred,
administrator setup has been made on another recorder.
Use a PC to copy the administrator's officer data to the
\WIDKEY on the USB memory device.
For details regarding text files containing administrator's
officer data, see "Text Files Used with the Recorder" on
pages 29 – 33. Perform operations above from Step 1.
[READY] lamp goes off:
This indicates that the data could not be correctly loaded.
Perform the operations below in the stated order. If the
[READY] lamp still does not light, consult your supplier.
Remove the USB memory device, and perform the
operation from Step 1.
Replace the USB memory device, and perform the
operation from Step 1.
•
LCD Lighting Time
•
Recorder Version
•
Recorder serial number
•
Microcontroller Version
•
Remote Control Panel Version
•
Last erros
95
] button to
*
check error occurred, the followings
1
] button
Hide quick links:
Advertisement
Table of Contents
