This product is eligible for the AVCCAM 3 Year Warranty Repair Program. For Operating Instructions details, see page 7. Memory Card Portable Recorder AG-HMR10P Model No. AG-HMR10E Model No. Before operating this product, please read the instructions carefully and save this manual for future use.
Please contact either a local or foreign The exclamation point within an equilateral Panasonic authorized service center for triangle is intended to alert the user to the presence of important operating and assistance in selecting an alternate AC plug.
Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.
Page 4
If you lose the fuse cover the plug must not be Fuse used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer.
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ07094 Support contact: Panasonic Broadcast & Television Systems Company 1-800-524-1448 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 6
EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1. Applicable standards and operating environment (AG-HMR10E) The apparatus is compliant with: • standards EN55103-1 and EN55103-2 1996.11, and • electromagnetic environments E1, E2, E3 and E4 2. Pre-requisite conditions to achieving compliance with the above standards <1>...
Page 7
Details about user registration and the extended warranty: Please note, this is a site that is not maintained by Panasonic Canada Inc. The Panasonic Canada Inc. privacy policy does not apply and is not applicable in relation to any information submitted. This link is provided to you for convenience.
Page 8
● SDHC Logo is a trademark of SD-3C, LLC. ● miniSD/microSD Logos are trademarks of SD-3C, LLC. ● “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. ● This product has been manufactured under license from Dolby Laboratories.
Using the portable recorder This memory card portable recorder is an AVCCAM recording and playback device that is compact and can be powered by a battery. It is equipped with an SD Memory Card slot, a 3.5-inch LCD monitor, and a wide range of input and output terminals, such as SDI, HDMI, USB 2.0 and CAMERA (for connecting the AG-HCK10G optional camera head).
Page 10
Using the portable recorder (continued) Playing SD Memory Card content Playback on the portable recorder’s LCD monitor (Page 60) Content (video/audio) that is shot with an AVCCAM camera-recorder and recorded onto an SD Memory Card can be played back on-the-spot. AG-HMR10 (portable recorder) AVCCAM camera-recorder...
Page 11
HD-SDI output Example of system configuration for SDI mode ■ When outputting data in the portable recorder’s recording format Select [SDI EE SEL] → [NORMAL] in the [AV OUT SETUP] setup menu. • Using the setup menus (Page 29) AG-HMR10 (portable recorder) Camera-recorder External monitor HD-SDI input signal...
Page 12
Using the portable recorder (continued) Example of system configuration for CAM mode AG-HMR10 (portable recorder) AG-HCK10G camera head External monitor (optional) Camera cable HD-SDI output signal (optional) • Frame sequence information is not output. • S-VITC/UMID information is not output. •...
(Page 31) Panasonic makes no compensation for your recordings. • Please understand that Panasonic makes no compensation for your recordings in cases where images and/or sound were not recorded as you intended due to problems with the camera-recorder or SD/SDHC Memory Cards.
Page 16
• It is recommended that you use SD Memory Cards or SDHC Memory Cards of SD speed class 2 or above, or the following Panasonic SD Memory Cards (correct as of October 2009). Note that class 4 or higher is required when recording in PH mode and HA mode.
Page 17
SDHC-compatible device • This product (SDHC-compatible device) is compatible both with SD Memory Cards and with SDHC Memory Cards. SDHC Memory Cards may be used with SDHC Memory Card-compatible devices, but cannot be used with devices that are only compatible with SD Memory Cards. (Always check the relevant product’s operating instructions when using SDHC Memory Cards with other devices.) When cards of SD speed class 4 or above are recommended for the SD-compatible devices, use of such cards will ensure stable recording operations.
Operating precautions The portable recorder and SD Memory Card When carrying the portable recorder, take care become warm during usage. This is not a defect. not to drop it or let it hit other objects. • Strong impact can cause the outer case to break Do not allow any water to get into the unit when or damage the portable recorder.
Page 19
Protect the battery terminals. Liquid crystal displays • Images or letters can get burned onto the screen Keep the battery terminals free from dust and foreign matter. of the LCD if they are displayed for a long time, If the battery has been inadvertently dropped, but you can fix this by leaving the unit off for check whether its body and terminal area have several hours.
Accessories Battery ∗ AC Adapter AC power supply cables AG-HMR10P AG-HMR10E (For the U.K.) AG-HMR10E (For areas other than the U.K.) DC cable CD-ROM ∗ For part numbers for the battery, see “Optional accessories”. • “For VIDEO CAMERA” is displayed on the AC adapter that is supplied with the unit, but it can be used without any problems.
Description of parts Operation panel, LCD and system parts ■ Front PLAY/STILL button LCD monitor (Pages 29, 44, 60) (Page 32) Indicated by in the operation descriptions. MENU button (Page 29) ENTER button (Pages 29, 41, 44, 60) POWER button (Page 26) AUDIO MON/ADV button (Pages 44, 47, 70)
Power sources Charging The battery does not come ready charged when the portable recorder is purchased. Charge the battery before use. It is recommended that you keep one extra battery as a spare. ■ Charging lamp Connect the power cable to the AC adapter. On: Charging in progress Disconnect the DC cable.
Page 24
AC adapter. ■ Remaining battery capacity displays When using Panasonic-manufactured batteries compatible with this product, the remaining battery capacity is displayed in minutes. 90 min Time remaining will be displayed after a brief pause.
• Support the battery with your hand to ensure that it will not fall. Battery release button Panasonic VW-VBG260 battery may be used with this product. POWER lamp Using the AC adapter Installation Removal Connect the DC cable to the AC adapter.
Turning the power on/off Press the [POWER] button for 2 seconds or longer. • The POWER lamp (green) illuminates and the power turns on. • If you press the [POWER] button for 2 seconds or longer when the power is on, the POWER lamp flashes, the power turns off, and then the lamp goes off.
Tally lamp The tally lamp turns on during recording (red). Also, the tally lamp flashes in the following circumstances. (flashes 4 times per second) Tally lamp • Recording error has occurred • Battery has run out • SD Memory Card is full REC/ PAUSE AUDIO MON/ADV...
Operation modes The portable recorder has 3 operation modes: REC mode, PB mode and PC mode. Press the [MODE] button to change the mode. While the power is off, connect the Press the AG-HCK10G camera head (optional) to the [POWER] button portable recorder with the camera cable for 2 seconds or (optional), and then press the [POWER] button...
Using the setup menus ■ Button operations in the setup menus Moves to the menu item above. For some items, changes the Displays the menu. value. When the menu is displayed, closes the menu. Moves to the menu item on the Moves to the menu item to the left.
Using the setup menus (continued) Initializing the setup menus Press the [ENTER] button or to set the item. Perform the following operation during REC mode Press to change the values. to return the setup menus to their factory default Example: settings.
Setting the date and time/Recharging the built-in battery/Adjusting the LCD monitor Before recording with this portable recorder, first set the date and time and adjust the LCD monitor in the setup menus. Setting the date and time The [CLOCK SET] value in the setup menu is Press to select [OCT].
Setting the date and time/Recharging the built-in battery/Adjusting the LCD monitor (continued) • Slight time errors may occur, so check that the time is correct before recording. • When using the recorder overseas, do not set the [CLOCK SET] time to the local time, but instead enter the time difference from Greenwich Mean Time in [TIME ZONE].
SD Memory Cards Inserting and removing SD Memory • Always format SD Memory Cards that have Cards been used in other devices when first using them with this portable recorder. (Page 34) Open the SD card cover. • If the system frequency of the portable recorder is changed, it will not be possible to Slide the card slot cover open button to use an SD Memory Card.
AVCCAM Restorer can also be downloaded from recording or the recording finalization process, a the following website. repair verification screen is displayed the next time https://eww.pavc.panasonic.co.jp/pro-av/ the power is switched on, allowing errors to be repaired. Formatting SD Memory Cards Press the portable recorder’s [POWER] button for 2...
SD Memory Card recording times • Total available recording times (approx.) when using SD/SDHC Memory Cards manufactured by Panasonic Recording mode PH ∗ HA ∗ HG ∗ HE ∗ SD Memory Card (Highest quality mode ∗ capacity (High quality mode/...
• The factory default setting for this unit is as Press the [POWER] button for 2 seconds or follows. longer to turn on the power. For AG-HMR10P: PH mode 1080/60i The SDI mode screen appears. recording For AG-HMR10E: PH mode 1080/50i...
TC 12 : 34 : 56 . 00 120 min • The factory default setting for this unit is as – REC 112 min follows. For AG-HMR10P: PH mode 1080/60i recording PH 1080 For AG-HMR10E: PH mode 1080/50i recording Press the [REC/PAUSE] button to start shooting.
Page 38
Recording onto an SD Memory Card (REC mode) (continued) ■ About recording onto SD Memory Cards • The images shot from when recording starts until it is stopped are recorded as one clip. • The upper limit for the number of clips that can be recorded on a single SD Memory Card is 900. (However, note that this clip limit of 900 may be exceeded if recording is started immediately after turning on the power.) •...
Setting the time code Setting the time code When the screen below appears, set the time code value. In the [TC/UB SETUP] setup menu, set the Press to select the time code value. following time code related items. (Page 90) •...
Setting the time code (continued) Setting user information Set the user information. Press to select the user information The user information setting allows you to record characters. a memo, using up to 8 characters from a choice of • You can use numbers from 0 to 9 and letters 16 different character types.
Using the [USER] button ■ You can assign one of eleven functions to the INH (Disable operation) [USER] button. Using the [USER] button allows When INH is assigned, there is no operation you to easily switch the portable recorder function. when the [USER] button is pressed.
Page 42
Using the [USER] button (continued) ■ ■ LCD DTL (Emphasizing outlines) SHOT MARK (Shot mark function) Emphasizing the outlines of the images you The marks added to clip thumbnails are called see on the LCD makes it easier to focus. shot marks.
Page 43
■ COUNTER (Counter function) You can display a counter that indicates how much time has elapsed during recording or shooting. Each time you press the [USER] button, the display changes as follows. 0 : 00 . 00 Counter value display ·...
Useful recording and shooting functions If you press designated buttons while pressing down the [SHIFT/EXEC] button, you can use useful recording and shooting functions. • Operation is not possible when a menu screen is displayed. First close the menu screen, and then perform the operation.
White balance and black balance Mode Operation Adjustment adjustment White balance Recording adjustment is performed. White balance W.SET Black balance adjustment Other than In order to reproduce the white accurately, adjust is performed after white recording the ratio between the three RGB primary colors. balance adjustment.
Useful recording and shooting functions (continued) Using focus assist (FA) Temporarily switching to auto focus mode (ONE PUSH AF) The center of the screen can be enlarged to make it easier to focus. Even during manual focus (Page 52), you can temporarily switch to auto focus mode to focus While pressing the [SHIFT/EXEC] button, automatically.
LCD monitor. • The recording level is set approximately 8 dB • The recorded date and time display will follow the higher than Panasonic broadcasting camera- [DATE/TIME] setting in [DISPLAY SETUP]. recorders (AJ series products). When [DATE/TIME] is set to [OFF], the date and •...
Useful recording and shooting functions (continued) Using the REPEAT REC function Press the [REC/PAUSE] button to start REPEAT REC operation. Use an SD Memory Card with at least 16 GB of • Recording can begin if the recording function memory. Clips approximately 90 minutes long are display is “R-PAUSE”.
Page 49
Press the [REC/PAUSE] button to stop REPEAT REC operation. • Recording can be stopped if the recording function display is “R-REC”. Example: When stopping recording using a 16 GB SD Memory Card Operation to stop recording Recording stop interval (Time) Deletion processing Clip 8 recording interval...
Operating the camera head The operation buttons on this portable recorder can be used to operate the camera function of the AG- HCK10G camera head (optional). • Operation is not possible when a menu screen is displayed. First close the menu screen, and then perform the operation.
PRE REC Optical Image Stabilizer Record video and audio from three seconds before Use the Optical Image Stabilizer (OIS) to reduce the time of the operation to start recording. the effects of camera head shake when shooting by hand. Operation to start Operation to stop Select [O.I.S.] →...
Operating the camera head (continued) Performing manual adjustments (CAMERA FUNCTIONS) The focus, iris, shutter speed and white balance can be manually adjusted. Enable manual adjustment by setting the items in the [CAMERA SETUP] setup menu. (See table below) Press the [ENTER] button to select the function. Each time you press the [ENTER] button, the functions that can be manually adjusted are displayed in order on the LCD monitor.
When [SYSTEM FREQ] is set to [59.9Hz] Shutter speed Adjusting the shutter speed Frame rate 50 Hz 60 Hz Select [IRIS] → [AUTO2] or [MANUAL] in the 1/100 1/60 [CAMERA SETUP] setup menu. Using the setup menus (Page 29) 1/50 1/60 Press the [ENTER] button to display 1/50...
Page 54
Operating the camera head (continued) ■ Range of shutter speed variations When [SYSTEM FREQ] is set to [59.9Hz] With the 1080/60i or 720/60P formats (Standard) SYNCRO SCAN 1/15 1/30 1/60 1/2000 1/1000 1/500 1/250 1/120 1/100 With the 1080/30P or 720/30P formats SYNCRO SCAN 1/15 1/30...
Page 55
• Depending on the environment, there may be Setting the white balance some error in the adjustment. • Adjust the white balance yourself if you need Press the [ENTER] button to display a more precise white balance. (For adjusting on the LCD monitor. the white balance and black balance, see page 45.) Press...
Shooting in progressive mode Select [REC FORMAT] → [PH1080/30P] Note the following when shooting in or [PH1080/24P] (or [PH1080/25P]) in the progressive mode. [RECORDING SETUP] setup menu to enable • Set the shutter speed to 1/50 for best results. shooting in progressive mode. (Page 88) •...
Clip metadata SCENARIO: ∗ You can add the video and audio systems, name of the videographer, shooting location, text memos This indicates the PROGRAM NAME, and other information to the video data you have SCENE NO. and TAKE NO. recorded on the SD Memory Card. This data is NEWS 1: called the clip metadata.
Clip metadata (continued) CARD READ: Uploading the metadata The metadata that is set on the SD Memory (META DATA) Card is loaded onto the portable recorder. Press the [ENTER] button to select the You can perform any of the following operations. metadata to be loaded, select whether or not If necessary, perform preparations prior to the the metadata is to be loaded (YES/NO), and...
Selecting the USER CLIP NAME recording method Press the [MENU] button and select [META DATA] → [USER CLIP NAME] to select the recording method. 2 options are available: [TYPE1] and [TYPE2] USER CLIP NAME to be recorded TYPE1 TYPE2 Uploaded If clip metadata has Uploaded data data +...
Clip playback (PB mode) Press the [POWER] button to turn on the power. When the [POWER] button is pressed for 2 seconds or longer, the POWER lamp (green) illuminates and the power turns on. Press the [MODE] button to display the thumbnail screen.
Thumbnail screen Video data created in one shooting session is called a “clip”. In PB mode, the clips are displayed on the LCD screen as thumbnails. (When there is a large number of clips, it will take some time for them to be displayed.) You can perform the following operations using the thumbnail screen.
Page 62
Thumbnail screen (continued) 1 Thumbnail display status (Page 65) The types of clips displayed as thumbnails appear in this area. 2 Repeat playback indicator (Page 63) Displayed during repeat playback. 3 Card status display Displays the SD Memory Card status. 4 Battery remaining display (Page 24) Displays the remaining battery capacity.
Playback settings (PLAY SETUP) The playback format and method can be set. Repeat playback (REPEAT PLAY) Setting the playback format Use this setting to repeatedly play back all available clips. (PB FORMAT) Press the [MENU] button. Set the format for playback. Using the setup menus (Page 29) Press the [MENU] button.
Playback settings (PLAY SETUP) (continued) Resume playback (RESUME PLAY) Setting the skip method (SKIP MODE) Use this setting to play back from where the clip was previously paused. Use this setting to set the operation performed when pressing while playback is paused. Press the [MENU] button.
Thumbnail operations Selecting the thumbnail display method (THUMBNAIL SETUP) You can display as thumbnails the type of clips that INDICATOR: you want to see. Set whether or not to display the indicators You can also set in detail how you want the (ON/OFF).
Thumbnail operations (continued) Deleting and protecting clips (OPERATION) Clips can be deleted or protected. • Protected clips cannot be deleted. • If you select [ALL CLIPS] to delete all clips Press the [MENU] button. from the memory, the operation may take Using the setup menus (Page 29) some time to complete, depending on the size of the clips to be deleted.
CLIP PROTECT: Press the [MENU] button to return to the YES: thumbnail screen. Protects the selected clips. Press to select a clip, and then press the [ENTER] button. mark is displayed.) • Select a protected clip to cancel the protection. ( mark disappears.) Formatting a memory card will delete all clips even if they are protected.
Page 68
Thumbnail operations (continued) SD Memory Card information screen Clip information screen REMAIN: Clip number Displays the remaining SD Memory Card Thumbnail (Thumbnail screen: Page 61) capacity. Clip information SD STANDARD: Displays the indicators that are added to the Displays whether or not the SD Memory clip, and various other information.
Useful playback functions Fast forward/rewind Next/previous clip Press during playback. Press during playback to pause the clip. The clip plays forwards or backwards at approximately 5 times ∗ normal speed. Press • Press during fast forward or rewind to change the fast forwarding or rewinding speed.
Useful playback functions (continued) Frame-by-frame playback Viewing images on a television or monitor Press during playback to pause the clip. You can view the playback images on a television Press the [AUDIO MON/ADV] button. or monitor that is connected to the HD-SDI OUT •...
Connecting external devices Using headphones Stereo mini plug (3.5 mm) • Sound is not output from the built-in speaker when the headphones (optional) are connected. Using the external microphone External microphone Stereo mini plug (3.5 mm) MIC IN When the external microphone (optional) is connected to the microphone terminal, the recorded sound is switched as follows.
When outputting video and audio signals from the portable recorder to an external device, connect to the input terminals of the external device. • We recommend Panasonic’s HDMI cable. • This product is not compatible with VIERA Link. • Signals cannot be output from both the HD-SDI OUT terminal and the HDMI terminal simultaneously. If...
Nonlinear editing (PC mode) Nonlinear editing of video data on SD Memory (Example) Windows Cards can be performed by connecting the portable recorder to an editing computer with a USB cable. (Connection: Page 72) Removable disk (E:) Use a sufficiently charged battery or the AC adapter. (Example) Macintosh •...
Screen displays Regular displays For details on the safety zone, see 33. (Page 78) 29 28 TC 12 : 34 : 56 . 00 120 min – 112 min D10X PH 1080 P3.2 K 18dB EXPANDED MARK OFF OCT 10 2009 17 : 20 : 00 MF 69 1 / 60 SPOT...
Page 75
The following indication is displayed when the 7 Information display REPEAT REC function is turned on. Displays the following information. • Performance of the auto white balance or the • Sufficient capacity to use the REPEAT REC auto black balance (In CAM mode: Page 45) function is available.
Page 76
Screen displays (continued) 14 Audio level meter display 21 Focus control information display (In CAM mode: Pages 52, 87) Displays the input level during recording or Displays the focus control information with recording standby, and the level of the audio 99 - 00.
Page 77
90 minutes until 27 Remaining battery capacity display recording of the next clip starts. When using Panasonic-manufactured batteries that are compatible with the portable recorder, Other than REPEAT REC (During SDI mode only) the remaining battery capacity is displayed in •...
Page 78
Screen displays (continued) 30 Input signal display SDI: Displayed when in SDI mode. • The display flashes when recording cannot be performed, such as when the input signal and recording format are different. CAM: Displayed when in CAM mode. • Flashes if the camera head has an abnormality, such as a malfunction or broken cable.
Main warning displays The main warning displays that appear on the LCD monitor screen are listed below. If a warning display is not listed here, check it carefully when it is displayed. ■ CANNOT SET PRE-REC, CANNOT BE USED DUE TO CARD CAPACITY TOO LOW.
Screen displays (continued) ■ ■ THE CLIP IS PROTECTED. NO CARD PLEASE CANCEL PROTECTION. No card is inserted. The clip is protected. Cancel the protection. NOW ACCESSING. THE RECORDING IS STOPPED PLEASE DO NOT REMOVE CARD. (OVER THE LIMITATION) Card is currently being accessed. Do not remove The recording will stop.
Page 81
■ SYSTEM ERROR TURN POWER OFF Displayed when an error has occurred in the system. Switch the power off and back on again. • If this error is displayed when accessing the SD Memory Card, such as when deleting a clip, the SD Memory Card may be damaged.
Screen displays (continued) Selecting the display items The following items can be displayed on the LCD monitor screen by setting them in [OTHER DISPLAY] in the [DISPLAY SETUP] setup menu (Page 92). Operation modes Display can be switched on/ Display item off in [OTHER DISPLAY] Time code display Media information display...
Recording and output format compatibility list The recording and output formats are selected as shown below in accordance with the settings in the setup menu. ■ SDI input signal and SDI output/HDMI output list SDI input signal and [SDI OUT] HD-SDI OUT terminal recording format HDMI terminal output...
Setup menu structure Recording (REC) mode menu <SDI mode> (during SDI input) REC MENU RECORDING SETUP REC FORMAT (Page 88) AUTO REC REPEAT REC MODE TC/UB SETUP TC MODE TIME STAMP (Page 90) MIC ALC SDI REGEN INT SG TC PRESET UB PRESET AV OUT SETUP SDI OUT...
Recording (REC) mode menu (continued) AV OUT SETUP SDI OUT (Page 91) HDMI OUT SEL SDI EDH DOWNCON MODE HP MODE DISPLAY SETUP (Page 92) ZEBRA SAFETY ZONE CARD FUNCTIONS CARD FORMAT FOCUS BAR (Page 93) CARD STATUS REC COUNTER OUTPUT OSD DATE/TIME LEVEL METER...
Setup menu list When the [SYSTEM FREQ] (Page 96) setting in [OTHER FUNCTIONS] is changed, the [SYNCRO SCAN] (Page 86), [REC FORMAT] (Page 88) and [HDMI OUT SEL] (Page 91) settings are changed to the factory default. CAMERA SETUP Display Item Description of settings mode...
Page 87
CAMERA SETUP (continued) Display Item Description of settings mode GAMMA Selects the gamma curve. HD NORM: This gamma setting is suitable for HD shooting. LOW: Makes a mellow image using a gamma curve that has a gentle incline in the low-brightness area. The contrast sharpens. SD NORM: This is the normal video setting, continued from the DVX100 series.
Sets when using a camera-recorder that is not manufactured by Panasonic. • For details on whether to select TYPE1 or TYPE2, see “Recording formats and recording marks of Panasonic camera-recorders”. (Page 89) • See the following web site for devices that have confirmed compatibility with TYPE3. http://panasonic.biz/sav/autorec_e •...
Page 89
If the UB (LTC) or VITC (S-VITC) of the connected camera recorder is set to the frame rate, it will be superimposed on the HD-SDI signal. For details, see the Panasonic camera recorder user’s manual. • If the recording format is 1080i and recording mark type is set to [TYPE1], set [UB MODE] to [FR] (frame...
Setup menu list (continued) TC/UB SETUP The content selected under [TC/UB SETUP] is set for each mode individually. Display Item Description of settings mode TC MODE SDI/CAM Selects the time code correction mode when the time code of the internal time (Not displayed code generator is recorded.
AV OUT SETUP Display Item Description of settings mode SDI OUT SDI/CAM Selects the output video format of the SDI OUT terminal. Outputs in the recording format. DOWNCON: Outputs in the down-converted format. OFF: Does not output video from the SDI OUT terminal. (HDMI output mode) HDMI OUT SEL SDI/CAM Sets the output video format of the HDMI OUT terminal.
Setup menu list (continued) DISPLAY SETUP Display Item Description of settings mode ZEBRA Sets the level of the zebra pattern that is displayed on the LCD monitor screen. OFF, 105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50% SAFETY ZONE Sets the display method for the safety zone.
CARD FUNCTIONS Display Item Description of settings mode CARD SDI/CAM Formats the SD Memory Card. FORMAT YES NO CARD STATUS SDI/CAM Displays the SD Memory Card status. YES NO CLIP Displays information about the selected clip. PROPERTY YES NO META DATA Display Item Description of settings...
Shooting date DATE & TIME: Shooting date and time DATE FORMAT PB Selects the format of the clip’s date display that is displayed when [DATA DISPLAY] → [DATE] is selected. (AG-HMR10P) (AG-HMR10E) Y-M-D: year/month/day Y-M-D: year/month/day M-D-Y: month/day/year M-D-Y: month/day/year...
OPERATION Display Item Description of settings mode DELETE Deletes clips. ALL CLIPS: Deletes all clips. SELECT: Deletes only the selected clips. Press the [SHIFT/EXEC] button and then select [YES] to execute the deletion. Returns to the previous screen. • Clips for which protection is set in [CLIP PROTECT] cannot be deleted. INDEX Adds or deletes a clip index.
Page 96
Card is not inserted, when the portable recorder is in PB mode or PC mode, or when the AC adapter is connected. SYSTEM FREQ SDI/CAM Switches the system frequency. (AG-HMR10P) 59.9Hz: Sets the system frequency to 59.94 Hz. 50Hz: Sets the system frequency to 50 Hz.
Page 97
OTHER FUNCTIONS (continued) Display Item Description of settings mode SYSTEM INFO SDI/CAM Displays the version of the portable recorder system. MENU INIT SDI/CAM Returns the menu settings to the factory default settings. • Even when the setup menus have been initialized, [TIME ZONE] will not revert to its factory default setting.
Troubleshooting Power supply • There’s no power. Make sure the battery and AC adapter are connected properly. Check the connections again. • Power goes off for no To prevent the battery from running down needlessly, the portable apparent reason. recorder automatically turns off when it has been left in the shooting pause mode for more than 5 minutes.
Page 99
Recording • Cannot record even Is the write-protect switch on the SD Memory Card in the “LOCK” through the SD Memory position? The card cannot be recorded to if the switch is in the Card is inserted correctly. “LOCK” position. •...
Page 100
Troubleshooting (continued) PC connection • Computer does not Check the operating environment. • recognize the recorder Is the recorder’s operating mode setting correct? The recorder will when USB connection cable not be recognized when in REC mode or PB mode. Please set the is connected.
Page 101
The changeover between clips may not always be smooth when playing back multiple clips in succession. Video may momentarily pause when playing back multiple clips in succession in circumstances such as those detailed below. ■ Mixture of different recording formats Recording mode = PH mode Playback format = 1080/60i(30P) or 1080/50i(25P) Recording format...
Updating the portable recorder For details on updating the portable recorder, see the support page of the following website. https://eww.pavc.panasonic.co.jp/pro-av/ Cleaning When cleaning, do not use benzene or thinner. • Using benzine or paint thinners may deform the recorder and/or cause the surface finish to peel off.
SD Memory Card, be sure to use the dedicated AVCCAM Viewer. The AVCCAM Viewer can be downloaded from the following website. (Compatible OS: Windows XP/Windows Vista/Mac OS X 10.5/Mac OS X 10.4) https://eww.pavc.panasonic.co.jp/pro-av/ ■ Concerning the handling of the recorder’s metadata A special manufacturer area in the control file area under the AVCHD format is employed for the metadata which is supported by this recorder.
Specifications [General specifications] AG-HCK10G is connected When [SYSTEM FREQ] is set to [50Hz] Supply voltage DC 7.2 V (when the battery is used)/ PH mode: DC 7.3 V (when the AC adapter is used) 1080/50i Power consumption 1080/25P (over 50i) ∗ When only SDI recording is used: 6.5 W 720/50P 720/25P (over 50P) ∗...
Page 106
Specifications (continued) [Video system] [Other input and output connectors] Video signals USB terminal When [SYSTEM FREQ] is set to [59.9Hz] Type mini B connector (compliant with USB ver. 2.0) 1080/60i, 720/60p CAM REMOTE jack Super mini jack (2.5 mm diameter) (ZOOM S/S) When [SYSTEM FREQ] is set to [50Hz] 1080/50i, 720/50p [AC adapter with charging function]...
Page 109
For Europe Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.