Setting up/Deleting Officer Data
Deleting entered data
1. Press the [MENU] button.
The Menu appears.
,
2. Press the [
] buttons to select [Setup/Info]
and press the [
] button to confirm the entry.
Select
Confirm
,
3. Press the [
] buttons to select [Officer] and
press the [
] button to confirm the entry.
Select
Confirm
The Officer setup top screen appears.
(continued)
Cursor button
RETURN
MENU
MENU button
CONTROL PANEL
ON/
OFF
,
4. Press the [
or [Officer2] to be deleted, and press the [
button to confirm the entry.
Select
Confirm
Notes:
•
Only Officer1 and Officer2 data can be selected. Even if
Source, Area, Shift, or Work Time is selected, the data
cannot be deleted.
•
When the Officer1 data are deleted, the Source, Area,
Shift, and Work Time data for the Officer1 are also
deleted.
,
5. Press the [
press the [
] button to confirm the entry.
Select
Confirm
The displayed screen depends on the setup method.
<When set in AUTO mode>
<When set in MANUAL mode>
<When set in LIST mode>
This deletes officer data selected in Step 4.
43
] buttons to select [Officer1]
] buttons to select [Delete] and
]