Setting Shutter Speed (In Patrol Mode); Setting Camera Zoom (In Patrol Mode) - Panasonic AG-CPD20P Operating Instructions Manual

Viewing Live Video

Setting shutter speed (in PATROL mode)

Set a shutter speed to capture sharp video of fast-moving
subjects.
This menu is available only when [Init LPR Mode] in
administrator setup is set to "ENABLE" and [LPR Mode] is
set to "PATROL".
Note:
This menu is available only when the [CAMERA 1] connector
input is selected.
1. Press the [MENU] button.
The Menu appears.
2. Confirm that [Camera1] is selected, and press
the [ ] button.
Confirm
,
3. Press the [ ] buttons to select [Patrol
Shutter Speed].
The
Select
,
4. Press the [ ] buttons to select a shutter
speed.
Select
AUTO: Automatically adjusts the shutter speed to
ambient light.
1/100, 1/500, 1/1000: Set as required by the subject.
(continued)
appears.
RETURN MENU
CONTROL PANEL
ON/
OFF

Setting camera zoom (in PATROL mode)

The camera zoom can be set in the range 1.0 to 22.0 x.
This menu is available only when [Init LPR Mode] in
administrator setup is set to "ENABLE" and [LPR Mode] is
set to "PATROL".
Note:
This menu is available only when the [CAMERA 1] connector
input is selected.
1. Press the [MENU] button.
The Menu appears.
2. Confirm that [Camera1] is selected, and press
the [ ] button.
Confirm
,
3. Use the [ ] buttons to select [Patrol Zoom].
The
Select
4. Press the [ ] button to raise the ratio.
Press the [ ] button to lower the ratio.
51
Cursor button
MENU button
appears.
Raise the ratio.
Lower the ratio.