10.1 SPN 111/FMI 1
This diagnosis typically coolant level low.
10.1.1
Engine Coolant Level Sensor Check
Check as follows:
1. Turn the vehicle ignition switch ON (key On, engine OFF).
2. Check for multiple codes.
[a] If other faults are active in addition to fault 111/1, troubleshoot the other faults first.
[b] If only fault 111/1 is active, go to step 3.
3. Check the coolant level in the reservoir. See Figure 10-1.
Figure 10-1
Engine Coolant Level Sensor Mounted in Radiator Top Tank
[a] If the coolant level in the reservoir is not within limit, refer to section 10.1.2.
All information subject to change without notice.
PRELIMINARY 6SE567 0512 Copyright © 2005 DETROIT DIESEL CORPORATION
DDEC VI SERIES 60 TROUBLESHOOTING GUIDE
10-3
Need help?
Do you have a question about the Series 60 DDEC VI and is the answer not in the manual?
Questions and answers