Electrical System - Toro Groundsmaster 300 Series Service Manual

Electrical System

________________________________________________________________________________________________________________________________________________________
Item
________________________________________________________________________________________________________________________________________________________
Starter
Type
Nominal Output
Direction of Rotation
No-load Characteristics (Cold)
Terminal Voltage/Current
Speed
Height of Brush
Spring Pressure
Commutator O.D.
Depth of Commutator Undercut
Pinion Gap
Thrust Gap
________________________________________________________________________________________________________________________________________________________
Alternator
Nominal Output
Direction of Rotation
No Load Output Characteristics (Cold)
Terminal Voltage/Current
Speed
Load Output Characteristics (Cold)
Terminal Voltage/Current
Speed
________________________________________________________________________________________________________________________________________________________
Regulator (separate type)
Regulated Voltage
________________________________________________________________________________________________________________________________________________________
Glow Plugs
Rated Voltage
Rated Current (when rated voltage
is applied for 30 seconds)
Resistance
________________________________________________________________________________________________________________________________________________________
Glow Plug Indicator
Rated Current
Voltage Across Terminals (at 29A)
________________________________________________________________________________________________________________________________________________________
®
Groundsmaster 300 Series
Standard Specification
Solenoid shift type
2.0 kW - 12V
Clockwise as viewed from pinion side
11V/130A max. at 20°C (68°F)
3850 rpm min.
11.5 mm (0.45 in.)
3 kg (6.6 lb.)
38.7 mm (1.52 in.)
0.5 -0.8 mm (0.02 - 0.03 in.)
0.5 - 2.0 mm (0.02 - 0.08 in.)
0.5 (0.02 in.) max.
12V - 35A
Clockwise as viewed from pulley side
14V/0A at 20°C (68°F)
1300 rpm or less
14V/30A or more at 20°C (68°F)
2500 rpm
14.8 ± 0.3V
10.5V DC
9.7A ± 1.0A
0.16 ohm (at room temperature)
29A
1.7V ± 0.2V
Page 4 - 9
Repair Limit Service Limit
– 1.0 mm (– 0.4 in.)
0.2 mm (0.008 in.)
1.7 mm (0.07 in.)
1.8 kg (4 lb.)
Specifications