Message Log; Panel Sw Operation Order Screen - Yamaha 01v 96 Service Manual

1-98. MESSAGE LOG

Contents: The log of the check results is displayed.
Example of execution screen
--- MESSAGE LOG ---
[ 2 BATT]
NG:BATT (2.56V)
[ 6 MIDI]
OK: SCI2
BACK: [UP] NEXT: [DOWN] EXIT: [ENTER] Page 2
Press the [ ] key to display the next page and press
the [ ] key to display the previous page.
Press the [ENTER] key to exit this page.
2. Supplement
LCD display Fig. 1
A pressed SW
will disappear.
The next SW to
be pressed will flash.

Panel SW operation order screen

(See SW operation Fig. 1 and 2 for operation order.)
LCD display: 53 columns x 30 lines (320 × 240 dots with Font 5×7)
Switches not pressed in the specified order display .
If pressed in the specified order, the normal display will return.
A maximum of 999 pages can be displayed in the log
of the check results. Any additional pages will not be
displayed.
To clear the log, end the Service Check Program or
press the [CLEAR] key of the SOLO.
The [DEC] SW is not
displayed during the 1-24.
PANEL SW test.
01V96
95