01V96
INITIALIZING THE 01V96
You can delete all currently-recorded settings and
restore the factory-preset values, and reset
the Operation Lock password to its initial setting. Follow
the steps below.
Note:
• If you initialize the 01V96 to the factory-preset
values, all Scene, library and other data you
stored previously will be erased. Proceed with
caution.
• If you want to keep the current internal data, be
sure to first back up the data using the included
Studio Manager software.
Tip:
• You can also store the data to an external MIDI
device, such as a MIDI data filer, by using MIDI Bulk
Dump. (See page 115.)
1 Make sure that the power to the 01V96 is turned off.
2 While holding down the SCENE MEMORY [STORE]
button, turn on the POWER ON/OFF switch.
After a moment, the 01V96 displays the following
confirmation window.
3 To reset the 01V96 to factory default settings, move
the cursor to the INITIALIZE button, then press
[ENTER].
To cancel the initialization operation, move the cursor
to the CANCEL button, then press [ENTER].
When the internal data is thoroughly overwritten, the
01V96 restarts using the factory settings.
4 To reset the Operation Lock password to its initial
setting, in Step 2, move the cursor to the PASSWORD
button, then press [ENTER].
The password is reset to "1234".
If you do not take any action after the confirmation
window appears, the window automatically
closes and the 01V96 restarts without being initialized.
114