Connecting Wires To Terminals - Kenwood KDC-PSW9527 Instruction Manual

Connecting Wires to Terminals

A
Subwoofer output
KDC-PSW9527
(Navy Blue)
KDC-W9027 Subwoofer output
(Black)
KDC-W8027 Subwoofer right
output (Red)
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
Antenna Cord (ISO)
FM/AM antenna
input
Wiring harness
(Accessory1)
8 6
Connector A
7 5
8 6
Connector B
7 5
58
|
English
B
Center output
(Navy Blue)
—
Subwoofer left
output (White)
To External Display/
Steering remote
Fuse (10A)
External amplifier control wire
(Pink/ Black)
TEL mute wire (Brown)
If no connections are made, do
not let the wire come out from
the tab.
Power control/ Motor antenna
control wire (Blue/White)
Battery wire (Yellow)
Ignition wire (Red)
See next page
A –7 Pin (Red)
A–4 Pin (Yellow)
4 2
3 1
4 2
3 1
To KENWOOD disc changer/
GSM hands free unit/
External optional accessory
To connect these leads, refer
to the relevant instruction
manuals.
To "EXT.AMP.CONT. " terminal of the amplifier
EXT. having the external amp control function.
CONT
Connect to the terminal that is grounded
TEL MUTE
when either the telephone rings or during
conversation.
To connect the KENWOOD navigation
system, consult your navigation
manual.
Connect either to the power control terminal
when using the optional power amplifier, or to
P.CONT
the antenna control terminal in the vehicle.
ANT.CONT
A
B
Front right output (Red)
Front left output (White)
Rear right output (Red)
Rear left output (White)
AUX right input (Red)
AUX left input (White)