News Bulletin With Timeout Setting; Local Seek; Tuning Mode; Auto Memory Entry - Kenwood KDC-PSW9527 Instruction Manual

In Tuner mode

News Bulletin with Timeout Setting

It switches automatically when a news bulletin
starts even if the radio isn't being listened to. Also,
the time interval when interrupt is prohibited can
be set.
Display and Setting
"News: OFF"
"News: 00min"
"News: 90min"
When "News: 00min" — "News: 90min" is set, the
News Bulletin Interrupt function is ON.
When it's ON, the "News " indicator is ON.
When the news bulletin starts, "News " is
displayed, and it switches to the news bulletin.
• If you choose the "20min" setting, further news
bulletins will not be received for 20 minutes once the
first news bulletin is received.
• The news bulletin volume is the same level that was
set for 'Traffic Information' (page 35).
• This function is only available if the desired station
sends PTY-code for news bulletin or belongs to
'Enhanced Other Network'-Network sending PTY-code
for news bulletin.
• When the News Bulletin Interrupt function is ON, it
switches to an FM station.
In Tuner mode

Local Seek

Only stations whose reception is good are
searched for in auto seek tuning.
Display Setting
"Local Seek: OFF" The local seek function is OFF.
"Local Seek: ON" The local seek function is ON.
In Tuner mode

Tuning Mode

Sets the tuning mode.
Tuning mode Display
Auto seek "Seek mode: Auto 1" Automatic search for a
Preset station "Seek mode: Auto 2" Search in order of the stations
seek
Manual "Seek mode: Manual" Normal manual tuning
In Tuner mode

Auto Memory Entry

For the operation method refer to 'Auto Memory
Entry' (page 34).

AF (Alternative Frequency)

When poor reception is experienced,
automatically switch to another frequency
broadcasting the same program in the same RDS
network with better reception.
Display Setting
"AF: ON" The AF function is ON.
"AF: OFF" The AF function is OFF.
• When no other stations with stronger reception are
available for the same program in the RDS network,
you may hear the incoming broadcast in bits and
snatches. Turn OFF the AF function in such a case.
Restricting RDS Region (Region
Restrict Function)
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region.
Display Setting
"Regional: ON" The Region Restrict Function is ON.
"Regional: OFF" The Region Restrict Function is OFF.
• Sometimes stations in the same network broadcast
different programs or use different program service
names.
Operation
station.
in the Preset memory.
control.
51
|
English