Kenwood KDC-PSW9527 Instruction Manual page 23

Cd receiver
Hide thumbs Also See for KDC-PSW9527:
Table of Contents

Advertisement

• According to the Bass Q Factor setting value, the
frequencies that can be set in Bass Center Frequency
change as shown below.
Bass Q Factor
Bass Center Frequency
1.00/1.25/1.50
60/70/80/100
2.00
60/70/80/150
• When the bass extend is set to ON, low frequency
response is extended by 20%.
• WOW: TruBass, FOCUS and SRS 3D are all set to values
shown below.
WOW
TruBass
FOCUS
High
ON
High
Low
ON
Low
OFF
OFF
OFF
• TruBass: Assisting the playback for the super bass
sound.
• FOCUS: Adjusts the sound image by changing the
vertical position of the speakers virtually and
increases or decreases the soundscape.
• SRS 3D: Making a natural 3D sound field.
• SRS 3D cannot be set in tuner source.
2nd section
[2] button
Adjustment Item Display
Subwoofer level
"SW LEVEL"
Subwoofer phase
"PHASE"
[3] button
Adjustment Item
Display
Front High Pass Filter
"X'OVER Front" Through/40/60/80/100/
Rear High Pass Filter
"X'OVER Rear" Through/40/60/80/100/
[4] button
Adjustment Item Display
Subwoofer
"X'OVER Sub Woofer" 50/80/120/Through Hz
Low Pass Filter
SRS 3D
ON
ON
OFF
Range
–15 — +15
Normal (0°)/Reverse (180°)
Range
120/150/180/220 Hz
120/150/180/220 Hz
Range
[5] button
Adjustment Item
Display
Loudness
"LOUD"
• Loudness: Compensating for low and high tones
during low volume.
3rd section
[2] button
Adjustment Item
Display
Balance
"BL"
Fader
"F"
[3] button
Adjustment Item
Display
Volume offset
"VOL OFFSET"
• Volume offset: Each source's volume can be set as a
difference from the basic volume.
Range
ON/OFF
Range
Left 15 — Right 15
Rear 15 — Front 15
Range
–8 — 0
23
|
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-w8027Kdc-w9027

Table of Contents