Side Graphic Display Switching - Kenwood KDC-PSW9527 Instruction Manual

General features
The text display in the Lower text display
part
In Tuner source
Information
KENWOOD Logo
Clock
Spectrum Analyzer & Clock
Radio text
Date
In CD & External disc source
Information
KENWOOD Logo
Clock
Spectrum Analyzer & Clock
Disc title
Track Title
Disc name
Date
In MP3/WMA source
Information
KENWOOD Logo
Clock
Spectrum Analyzer & Clock
Song title & Artist name
Album name & Artist name
Folder name
File name
Date
In Standby
Information
KENWOOD Logo
Clock
Date
In Auxiliary input source
Information
KENWOOD Logo
Clock
Spectrum Analyzer & Clock
Date
• If 'Dual Zone System' (page 24) is turned ON while the
spectrum analyzer is displayed, the spectrum analyzer
disappears from the display.
16
|
English
Display
"LOGO"
"CLOCK"
"S/ANA+CLOCK"
"R-TEXT"
Display:A
"DATE"

Side Graphic Display Switching

Switching the Side graphic Display.
1
Display
"LOGO"
"CLOCK"
"S/ANA+CLOCK"
"DISC-TITLE"
"TRACK-TITLE"
"DNPS"
2
"DATE"
3
Display
"LOGO"
"CLOCK"
4
"S/ANA+CLOCK"
"TITLE/ARTIST"
"ALBUM/ARTIST"
5
"FOLDER NAME"
"FILE NAME"
"DATE"
Display
"LOGO"
"CLOCK"
"DATE"
Display
"LOGO"
"CLOCK"
6
"S/ANA+CLOCK"
"DATE"
• If the Disc title, Track title, Song title & Artist name, or
Album name & Artist name is selected when the disc
which does not have Disc title, Track title, Song title,
Album name, or Artist name is played, Kenwood Logo
are displayed.
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [3]/ [4] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
Enter display control mode
Press the [3]/ [4] ("DISP") button.
Select the display mode
Press the [2] ("MODE") button.
Select the "Display:A" display.
Enter display control mode
Press the [4] ("SIDE") button.
"Side Graphic" is displayed.
Select the side graphic display
Press the [4] or [¢] button.
Each time the button is pressed the side graphic
display switches as shown below.
Side graphic display
Text + Source
Graphic 1
Graphic 3
Spectrum analyzer 1
Spectrum analyzer 4
Blank
Exit display control mode
Press the [6] ("RTN") button.
• The setting of this function is available while "Display :
A" is selected for the Display mode.