Configuring Repdial Keys - Siemens HiPath 2000 User Manual

Step by Step
Assign functionality
Prog. feature key
Next layer
Change key
Destinations
g
Repdial key
Speed dial
Key label
Exit
Another key

Configuring repdial keys

You can also program internal and external station num-
bers on the second level. The LED function is not avail-
able for internal station numbers on the second level.
To program the second level, you must program a "Shift"
key page 91.
See also
S
Press and hold the required sensor key.
Select and confirm the option shown.
or
v
Open the Program/Service menu
Select and confirm the option shown.
S
Press the required sensor key.
If the key is already in use, the programmed phone
number appears on the screen.
if nec.
Select and confirm to save the phone number on the
second level.
Confirm.
Confirm.
Confirm.
j
Enter the station number.
or
Select and confirm the option shown.
j
Enter the speed-dial number (the speed-dial numbers
correspond to the system phonebook
if nec.
Select and confirm the option shown
Confirm.
or
Select and confirm the option shown.
Programming sensor keys
page 24.
page 42.
page 38).
page 98.
97