Transferring A Call After A Speaker Call Announcement In A Group - Siemens HiPath 2000 User Manual

Enhanced phone functions
Step by Step
Consultation
Calls
g
Speaker call
Transfer
78
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your ser-
vice personnel), you can use a speaker call (announce-
ment, page 151) to announce a call in progress to a
group of users
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
Prerequisite: You are conducting a call.
Confirm. The other party is placed on hold.
v
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter the group's station number.
[
Announce the call.
When a member of the group accepts the call
page 59, you are connected to this party.
\
Replace the handset.
or
Select and confirm the option shown
If the connection between the two other parties is
not established within 45 seconds, the call from
the first part returns to you (recall).
[1] "Differing display view in a HiPath 4000 environment"
page 67.
page 42.
[1]
.
page 196