Siemens HiPath 2000 Administration Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Telephone
  5. HIPATH 2000
  6. Administration manual

Siemens HiPath 2000 Administration Manual

Ip telephones
Hide thumbs Also See for HiPath 2000:
Table of Contents

Advertisement

Quick Links

See also: Administration Manual , Administrator's Manual
Documentation
HiPath 2000/3000/4000/5000
HiPath OpenOffice
optiPoint 410/420 Family
optiPoint application module
optiPoint display module
Administration Guide
Communication for the open minded
Siemens Enterprise Communications
www.siemens-enterprise.com

Advertisement

Table of Contents
loading

Related Manuals for Siemens HiPath 2000

Summary of Contents for Siemens HiPath 2000

  • Page 1 Documentation HiPath 2000/3000/4000/5000 HiPath OpenOffice optiPoint 410/420 Family optiPoint application module optiPoint display module Administration Guide Communication for the open minded Siemens Enterprise Communications www.siemens-enterprise.com...

  • Page 2: Safety Precautions

    Safety Precautions Safety Precautions For Your Safety IP telephones from the optiPoint 410/420 product family comply with the European standard EN 60 950, which deals with the safety of information technology appliances including electronic office equipment. This device has been designed with safety in mind, thus protecting both individuals and objects.

  • Page 3: Trademarks

    Safety Precautions Trademarks The device conforms to the EU directive 1999/5/EC as attested by the CE marking. This device has been manufactured in accordance with our certified environmental management system (ISO 14001). This process ensures that energy consumption and the use of primary raw materials are kept to a minimum, thus reducing waste production.

  • Page 4: Table Of Contents

    Contents Contents Safety Precautions......2 For Your Safety ..........2 Location of the Telephone.
  • Page 5 Contents optiPoint application module ....... . 47 System Information and Language Configuration ....47 Firmware Update .
  • Page 6 Contents Data Visualization (optiPoint 410 entry ) ..113 Status Messages......... 113 Binary Encoded ASCII Table .

  • Page 7: General Information

    General Information General Information About the Manual This administration manual will help you to install and administer the optiPoint 410/420. The manual contains important information for safe and proper operation of the optiPoint 410/420. Follow the instructions carefully to avoid improper operation and get the most out of your multi-function telephone in a network environment.

  • Page 8: Safety Precautions For Ip Telephony

    Internet on the Siemens Experts Wiki pages http://wiki.siemens-enterprise.com/ Secure Call (SPE) From HiPath 2000 V2 R4, HiPath OpenOffice EE V1, HiPath 4000 V4 R1 and HiPath 3000/5000 V7 R4 can be used SPE together with the optiPoint 410/420 economy plus, standard and advance telephones from Application Version V5 R5.2.0.

  • Page 9: Authentication

    General Information Authentication Authentication via certificates is another measure to increase security. To enable authentication using certificates, TLS must be set on Transport Base/Transport mode. Assigning and updating certificates is done via the DLS. You can also activate certifcation validation on the phone Certificate Check.

  • Page 10: Notes And Symbols

    General Information Step by Step Notes and Symbols Security Information that is important for preventing injury or damage is marked specially, as these are important instructions for correct use of the unit. This symbol indicates a hazard. Failure to follow the instructions given may result in injury or in damage to the unit.

  • Page 11: Operating The Telephone

    General Information Step by Step Operating the Telephone Lift the handset. Replace the handset. Conduct call. Enter a telephone number or code. Increase or reduce the value depending on the current operating mode. optiPoint 410/420 economy/economy plus/ standard/advance The option appears on the screen. Continue? >...

  • Page 12: Properties Of The Telephone Models

    General Information Properties of the Telephone Models This section provides an overview of the optiPoint 410/420 telephone models and their properties. Telephone Model optiPoint 410 entry optiPoint 410 2x24 economy optiPoint 410 2x24 economy plus optiPoint 410 2x24 standard optiPoint 410 4x24 advance optiPoint 420...

  • Page 13: Setting Up The Telephone

    Setting Up the Telephone Setting Up the Telephone This chapter describes how to connect the individual elements of the optiPoint 410/420 with each other ( Installing the Telephone) and how to start up the device ( Preparing for Operation). Installing the Telephone Connectors on the underside of the phone optiPoint 410 entry optiPoint 410/420 standard...

  • Page 14: Starting Up The Optipoint 410/420

    Setting Up the Telephone Starting up the optiPoint 410/420 Only use switches in the LAN, to which the optiPoint 410/420 is connected. Operation at hubs can cause serious malfunctions in the hub and in the whole network. The Western plugs of all cable connections must audibly snap into place.

  • Page 15: Preparing For Operation

    Setting Up the Telephone Step by Step Preparing for Operation For the optiPoint 410/420 economy/economy plus/ standard/advance, follow the sequence described below. The sequence for the optiPoint 410 entry is described from Page 17. The startup process sequence describes a standard case of configuration.

  • Page 16: Troubleshooting

    Setting Up the Telephone Step by Step Only if no DHCP server: Confirm. 01=Network? > Confirm. 01=DHCP IP assign? > > Confirm to switch the DHCP IP assign off. off? > The change is displayed. > Select and confirm. 02=Terminal IP addr.? >...

  • Page 17: Optipoint 410 Entry

    Setting Up the Telephone Step by Step optiPoint 410 entry If problems are encountered during the initial startup or if you have queries on individual specifications, the following chapters will be of help: • For specialized information on the administration of the optiPoint 410 entry see „Alphabetical Reference“...
  • Page 18 Setting Up the Telephone Step by Step Only if no DHCP server: Press function key 1. Enter the code to switch the DHCP IP assign off. Complete entry. Press function key 1. Enter the code. Enter the IP address of the optiPoint 410 entry (to edit see Page 106).

  • Page 19: Troubleshooting

    Setting Up the Telephone Step by Step Other Settings All other settings of your optiPoint 410 entry must be made through the "web-based management tool" Page 51. Open the "System" page in your browser and enter the following parameters: • Gateway address Page 76 •...

  • Page 20: Administration

    Administration Administration The following pages describe how to make administration settings for the optiPoint 410/420 on the HiPath 2000, HiPath OpenOffice, HiPath 3000/ 5000 and HiPath 4000 communication platforms. There are different ways to make administration settings for the optiPoint 410/420: •...

  • Page 21: Optipoint 410/420 Economy/Economy Plus/Standard/Advance

    Administration Step by Step optiPoint 410/420 economy/ economy plus/standard/advance Entering the Administration Area If you are in the administration area, you cannot reach the optiPoint 410/420 ("offline"). All functions in this area are protected against illegal access by a password. e d g Press keys simultaneously to enter the administration area.

  • Page 22: Setting Up The Telephone

    Administration Step by Step Setting up the Telephone DHCP IP Assignment For detailed information see Page 74. Switch to the administration area and choose "Configuration" Page 21. Confirm. 01=Network? > Confirm. 01=DHCP IP assign? > Confirm. Off? > > Confirm. >...
  • Page 23 Administration Step by Step Default Route For detailed information see Page 73. Switch to the administration area and choose "Configuration" Page 21. Confirm. 01=Network? > > Select and confirm. 04=Default route? > Enter the IP address (to edit see Page 106). Confirm.
  • Page 24 Administration Step by Step QoS Layer Options For detailed information see Page 86. Switch to the administration area and choose "Configuration" Page 21. Confirm. 01=Network? > > Select and confirm. 07=QoS L2/L3? > Confirm. L2on/L3on > > Select and confirm. L2off/L3off >...
  • Page 25 Administration Step by Step LAN Port 2 Mode For detailed information see Page 79. "LAN Port 2 Mode" is not configurable for optiPoint 410 entry and optiPoint 410/ 420 economy. Switch to the administration area and choose "Configuration" Page 21. Confirm.
  • Page 26 Administration Step by Step LAN Port 2 Auto MDIX For detailed information see Page 79. Switch to the administration area and choose "Configuration" Page 21. Confirm. 01=Network? > > Select and confirm. 11=LAN port 2 Auto MDIX? Confirm. Yes? > >...
  • Page 27 Administration Step by Step Subscriber Number For detailed information see Page 90. Switch to the administration area and choose "Configuration" Page 21. > Select and confirm. 02=System? > > Select and confirm. 03=Subscriber number? > You will now see the subscriber number. Enter the subscriber number (to edit see Page 106).
  • Page 28 Administration Step by Step DLS IP Address For detailed information see Page 74. Switch to the administration area and choose "Configuration" Page 21. > Select and confirm. 02=System? > > Select and confirm. 06=DLS IP address? > The IP address of the DLS server is displayed.
  • Page 29 Administration Step by Step H.225 S-Port Base For detailed information see Page 77. Switch to the administration area and choose "Configuration" Page 21. > Select and confirm. 02=System? > > Select and confirm. 09=H225:S-Port Base? > Enter the port number (to edit see Page 106).
  • Page 30 Administration Step by Step Compression For detailed information see Page 71. Switch to the administration area and choose "Configuration" Page 21. > Select and confirm. 03=Speech? > > Select and confirm. 02=Compression? > Confirm. G.729 > > Select and confirm. G0.723 >...
  • Page 31 Administration Step by Step Factory Reset For detailed information see Page 75. Switch to the administration area and choose "Configuration" Page 21. > Select and confirm. 04=Phone Administration? Confirm. 01=Factory Reset? > Enter the reset password (124816) . Confirm. The telephone restarts. Application Version For detailed information see Page 70.

  • Page 32: Testing The Telephone

    Administration Step by Step Testing the Telephone Display Test For detailed information see Page 74. Switch to the administration area and choose "Diagnostics" Page 21. Confirm. 01=Display test? > ABCDEFGHIJKLMNOPQRSTUVWX > Scroll to the next display. abcdefghijklmnopqrstuvwx > Scroll to the next display. 0123456789!“#$%&’()*+,-.
  • Page 33 Administration Step by Step Key Test For detailed information see Page 79. Switch to the administration area and choose "Diagnostics" Page 21. > Select and confirm. 03=Key test? > Please press a key > > e. g. Press any key (except The description appears on the display.
  • Page 34 Administration Step by Step PING Test For detailed information see Page 85. Switch to the administration area and choose "Diagnostics" Page 21. > Select and confirm. 07=Ping Test? > Confirm. 01=User specified IP? > Select and confirm. 02=PBX address? > Select and confirm.
  • Page 35 Administration Step by Step Line Status For detailed information see Page 82. Switch to the administration area and choose "Diagnostics" Page 21. > Select and confirm. 08=Line test? > Confirm. Off? > > Select and confirm. > The change is displayed. Self Labeling Key Test For detailed information see Page 88.

  • Page 36: Restarting The Telephone

    Administration Step by Step Restarting the Telephone Web-Based Management tool Reset via the web-based management tool Page 51. 1. Open the dialog "Restart Terminal". Menu: Administrator Actions > Restart Terminal 2. Click the "Restart" button. Interrupting the Power Supply Disconnect the red Western plug of the power supply unit cable (Pos.

  • Page 37: Error Messages

    Administration Step by Step Error Messages No IP Address The DHCP server cannot assign a terminal IP address No IP address Page 91. Possible solution: Check the DHCP server. No Network The telephone cannot find a network. No Network Possible solution: Check the network cable.
  • Page 38 Administration Step by Step Security Call Error Messages The certificate for "Secure Call" is missing or not valid. TLS UNAVAILABLE: TRA Possible solution: Update the certificate in the communications system. The SNTP server is not available. TLS UNAVAILABLE: TTT Possible solution: Check the SNTP server Page 67.

  • Page 39: Optipoint 410 Entry

    Administration Step by Step optiPoint 410 entry After integrating the optiPoint 410 entry into your network successfully Page 17, you can make all other settings via the "web-based management tool" Page 51. Entering the Administration Area If you are in the administration area, you cannot reach the optiPoint 410 entry ("offline").

  • Page 40: Restarting

    Administration Step by Step Restarting Web-Based Management Tool Reset via the web-based management tool Page 51. 1. Open the dialog "Restart Terminal". Menu: Administrator Actions > Restart Terminal 2. Click the "Restart" button. Change to the administration area Page 39. Function Codes Press keys simultaneously.

  • Page 41: Resetting Factory Settings

    Administration Step by Step Resetting Factory Settings Resetting can lead to the failure of all functions of the optiPoint 410 entry. Ensure that you have all the information necessary for the startup Page 17. For default values, see Page 109. Disconnect the power supply unit cable.

  • Page 42: Error Messages

    Administration Step by Step Error Messages The LEDs flash until you switch to the administration area Page 39. LEDs on the phone: No IP address The DHCP server cannot assign a terminal IP address Page 91. Possible solution Check the DHCP server. No terminal mask The DHCP server cannot assign a terminal mask Page 91.
  • Page 43 Administration Step by Step No terminal mask set The DHCP IP assignment Page 74 is switched off and no terminal mask is configured. Possible solution Activate the DHCP IP assignment Page 18. Enter the terminal mask Page 18. No default route set The DHCP IP assignment Page 74 is switched off and no default route is configured.
  • Page 44 Administration Step by Step No PBX address No PBX address Page 76 is configured. Possible solution Enter the PBX address Page 19. The PBX does not react The telephone cannot find the PBX Page 98. Possible solution Check the PBX. No system The PBX number Page 76, participant number...

  • Page 45: Optipoint Display Module

    Administration Step by Step optiPoint display module Firmware Update Firmware cannot be updated if a Java MIDlet is active (for example, a speed dialing list). To update the software for your optiPoint display module, perform the following steps: 1. Make sure that an FTP server is available, see Page 102 and that the relevant firmware file is stored on the server.
  • Page 46 Administration Step by Step Configuring the LDAP Server Perform the following steps to enter the LDAP server IP address and port number. 1. Start the web-based management tool, see Page 51. 2. Select "Administration" > [password] > "Applications" > "LDAP", see Page 56.

  • Page 47: Optipoint Application Module

    Administration Step by Step optiPoint application module System Information and Language Configuration To view hardware and software information about your optiPoint application modules as well as to change the user language and keypad assignment, open the "System settings" page which is integrated as a hidden menu in the "Display"...
  • Page 48 Administration Step by Step Set User Language Proceed as follows to change the user language of your optiPoint application module: Open the "System settings" page Page 48. Select the "Language" tab. Select the required language and confirm. Confirm the query by clicking the "Yes" softkey. The optiPoint application module is restarted and the interface is displayed in the changed language.

  • Page 49: Firmware Update

    Administration Step by Step Firmware Update Firmware cannot be updated if a Java MIDlet is active (for example, a speed dialing list). To update the software for your optiPoint application module, perform the following steps: 1. Make sure that an FTP server is available, see Page 102, and that the relevant firmware file is stored on the server.
  • Page 50 Administration Step by Step Configuring the LDAP Server Perform the following steps to enter the LDAP server IP address and port number. 1. Start the web-based management tool, see Page 51. 2. Select "Administration" > [password] > "Applications" > "LDAP", see Page 56.

  • Page 51: Web-Based Management Tool

    Administration Step by Step Web-Based Management Tool General The optiPoint 410/420 features a web server, which allows the phone to map its contents to a web browser on a PC integrated in the LAN (web-based management tool). For this, the IP data of the optiPoint 410/420 Page 116 and the PC must be arranged correctly.

  • Page 52: Preparation

    Administration Preparation Open Web-Based Management Tool To invoke the interface, open a web browser and enter the following URL: For optiPoint 410/420 economy plus/standard/advance: https://[IP address of the phone] For optiPoint 410 entry/economy: http://[IP address of the phone] where [IP of the phone] represents the IP address of the optiPoint 410/420 that you wish to match.

  • Page 53: Web-Based Management Structure

    Administration Web-Based Management Structure • General Information Page 54 • Administrator Actions – Change administrator password Page 54 – Reset User Password – Clear Screenlock Password Page 54 – Clear User Data Page 55 – Restart Terminal Page 55 – Restore Application Generic Platform Page 55 –...

  • Page 54: General Information

    Administration General Information Click the required field in the screen images to see additional information for this field. General Information Administrator Actions Change administrator password Clear screenlock password (Only available for optiPoint 410/420 standard/advance)
  • Page 55 Administration Clear user data Click the required field in the screen images to see additional information for this field. (Only available for optiPoint 410/420 standard/advance) Restart terminal Restore Application Generic Platform Factory Reset...

  • Page 56: Applications

    Administration Applications (Only available for optiPoint 410/420 standard/advance) Click the required field in the screen images to see additional information for this field. Dialing Properties (Only available for optiPoint 410/420 standard/advance) LDAP settings (Only available for optiPoint 410/420 standard/advance) WAP gateway (Only available for optiPoint 410/420 standard/advance)
  • Page 57 Administration WAP Favourites Click the required field in the screen images to see additional information for this field. (Only available for optiPoint 410/420 standard/advance) XML Applications - New Program XML Applications - Configure/Delete Program...

  • Page 58: Audio

    Administration Miscellaneous Click the required field in the screen images to see additional information for this field. (Only available for optiPoint 410/420 standard/advance) Audio Audio Settings...

  • Page 59: Diagnostics

    Administration Diagnostics Click the required field in the screen images to see additional information for this field. Diagnostic Tests Test results...

  • Page 60: File Transfer

    Administration File Transfer Click the required field in the screen images to see additional information for this field. File Transfer (optiPoint 410/420 standard/advance) LDAP FTP Settings (Only available for optiPoint 410/420 standard/advance)
  • Page 61 Administration ENB FTP Settings Click the required field in the screen images to see additional information for this field. (Only available for optiPoint 410/420 standard/advance) File Transfer (optiPoint 410/420 entry/economy/economy plus)

  • Page 62: Network

    Administration Network Click the required field in the screen images to see additional information for this field. Network and Routing (LAN port 2 mode only available for optiPoint 410/420 economy plus/ standard/advance)
  • Page 63 Administration SNMP settings Click the required field in the screen images to see additional information for this field. Quality of Service (QoS)
  • Page 64 Administration QoS Data Collection Click the required field in the screen images to see additional information for this field. Network Stack Hardening Screenshot ist noch nicht verfügbar (26.05.2008) - momentan erscheint „PortControl“...

  • Page 65: System

    Administration System Click the required field in the screen images to see additional information for this field. DLS Settings Gateway settings Signaling & Payload Encryption (SPE)
  • Page 66 Administration Port Settings Click the required field in the screen images to see additional information for this field. Port Control...
  • Page 67 Administration SRSR settings Click the required field in the screen images to see additional information for this field. Time Settings...

  • Page 68: Alphabetical Reference

    Alphabetical Reference Alphabetical Reference This glossary offers basic information that can be used by the administrator to carry out configuration and diagnostics-related jobs on the optiPoint 410/ 420. • Section „Description of Functions“ explains alphabetically sorted terms that you will encounter, for example, in the menus. The symbols guide the reader to the respective process descriptions: Operating the optiPoint 410 entry Operating the optiPoint 410/420 economy/economy plus/standard/...
  • Page 69 Alphabetical Reference Administrator Password • You can change the password here that is required for accessing the administrator area. • Valid values: Numeric • Minimum length: 6 (for more information, see Password Functions) • Maximum length: 9 • Default value: 123456 Page 54 APM/DSM File Name •...
  • Page 70 Alphabetical Reference Application Version • Displays the version of the telephone software. It contains information about the functional range of the optiPoint 410/420 and may change if the telephone software is updated ( Application File Name). Page 31 Page 54 Asset Identity •...
  • Page 71 Alphabetical Reference Codec Audio Mode Usage High Uncompressed audio Use uncompressed audio quality transmission. transmission ( G.711). preferred Suitable for broadband Intranet connections. Use preferred Suitable for connections with bandwidth compressed audio different bandwidths. preferred transmission. Use compressed audio Suitable for connections with bandwidth transmission low bandwidth.
  • Page 72 Alphabetical Reference • Consecutive good packets [in packets]: the good packets in succession between two bad packets will be counted. If the number of counted packets is less than the specified value, the threshold will be exceeded. – Valid values: 1 ... 255 –...
  • Page 73 Alphabetical Reference Debug Mode • Only on optiPoint 410/420 standard/advance in conjunction with a display module or application module. • This setting is required for application developers. • Please do not change this setting. Page 57 Debug Program on Server •...
  • Page 74 Alphabetical Reference DHCP • Activate this option if the required IP data of the telephone should be assigned dynamically by a DHCP server. • If no DHCP server is available in the IP network, please deactivate this option. In this case, the data corresponding to Terminal IP Address, Terminal Mask and Default Route must be defined manually.
  • Page 75 Alphabetical Reference External Access Code • Only configurable on optiPoint 410/420 standard/advance and only required if a display module or application module is used. • Specify the number that must be prefixed to access an external telephone number, e.g. "0". •...
  • Page 76 Alphabetical Reference • The password must match the FTP User Name. • Valid values: Alphanumeric • Minimum length: 1 character (for more information, see Password Functions) • Maximum length: 24 characters • Default password: 123abc Page 60 FTP Server Address •...
  • Page 77 Alphabetical Reference Gateway Port • Enter the Port number here for communication with the Gateway server. Page 65 H.225.0 RAS • Enter the Port number for transfer of H.225.0 RAS. • Use: Registry and approval for VoIP. • Default value Page 109.
  • Page 78 Alphabetical Reference HTTPs • Enter the Port number for communication with the HTTPS server (HTTP with SSL encryption). Page 66 International Dial Prefix • Only configurable on optiPoint 410/420 standard/advance and only required if a display module or application module is used. •...
  • Page 79 Alphabetical Reference Key Test • Test to check the functions of the telephone keys. • If you press a function key, the associated LED lights. • In display telephones, the corresponding name is shown on the display when you press a key (exception - terminates the test).
  • Page 80 • Valid values: 1 ... 65535. Page 56 and Page 66 Example of LDAP Template Template String Explanation SEARCHBASE "O=SIEMENS COMM, C=GB" Organization and specification of country SEARCHFILTER1 = "surnameNational,Surname" Search criterion (fast and advanced) SEARCHFILTER2 = Search criterion (fast "givenNameNational,First-name"...
  • Page 81 Alphabetical Reference Example for use (Copy & Paste) optiPoint 410 LDAP TEMPLATE (V1) SEARCHBASE "O=SIEMENS COMM, C=GB" SEARCHFILTER1 = "surnameNational,Surname" SEARCHFILTER2 = "givenNameNational,First-name" SEARCHFILTER3 = "department,Department" SEARCHFILTER4 = "localityShortCode,Location" SEARCHFILTER5 = "ou,Org. Unit" SEARCHATTRIB1 = "commonNameNational,Name,0" SEARCHATTRIB2 = "telephoneNumber,Telephone,1" SEARCHATTRIB3 = "alternatePhone,Telephone 2,1"...
  • Page 82 Alphabetical Reference LDAP Template File Name • Only configurable on optiPoint 410/420 standard/advance and only required if a display module or application module is used. • If an LDAP server is used, enter the name of the LDAP template file that is used in connection with this server.
  • Page 83 Alphabetical Reference Local Area Code • Only configurable on optiPoint 410/420 standard/advance and only required if a display module or application module is used. • Specify the local area code of your company here, e.g. "89" for Munich. • Canonical format Page 97.
  • Page 84 Alphabetical Reference MIB-II Error Count • Displays the number of error messages according to MIB. • The used MIB objects are: MIB Objects Explanation ifInDiscards Discarded ingoing packets iflnErrors Non-valid ingoing packets ifOutDiscards Discarded outgoing packets ifOutErrors Non-valid outgoing packets Page 59 Minimum Session Length •...
  • Page 85 Alphabetical Reference Packet Size • The packet size is expressed in time units. The values Auto, 10 ms and 20 ms are available. • Default value Page 109. Page 30 Page 58 PBX Address • Enter the IP address of your communication system. Page 26 Phone Identity •...
  • Page 86 Alphabetical Reference QCU Home Address • Enter the IP Address of the QCU server on which the QoS data is logged. • Default value Page 109. Page 64 QDC Server • Enter the Port number for communication with the QDC server. •...
  • Page 87 Alphabetical Reference Restart Terminal • Executes the restarting of your optiPoint 410/420. Page 55 Restore Application Generic Platform • Only on optiPoint 410/420 standard/advance in conjunction with a display module or application module. • Restore the AGP. Page 55 ROM Test •...
  • Page 88 Alphabetical Reference – Probe Interface: This port is required for error searches in customer systems (test interface). It allows external feedback suggestions from messages to be entered in telephones thus enabling different scenarios to be tested. – Test Interface: This function permits automatic regression tests. Keystrokes can be simulated and displays or audio statuses can be read out.
  • Page 89 Alphabetical Reference SNMP Server Address • If an SNMP server exists in the network, enter the IP Address of this server here. • Default address Page 109. Page 63 SNMP Trap Port • Define the Port here through which the SNMP error messages should be transmitted.
  • Page 90 Alphabetical Reference SRSR Switch To Standby Retry Count • Maximum number of negative attempts for switching over to standby mode. • If all attempts fail, a further attempt is made to switch to home mode (standard mode). • Valid values: 1 ... 255. •...
  • Page 91 Alphabetical Reference System Type • Select the type of communication platform used here (read only). • Base • Standby Page 26 Page 65 Page 65 Terminal IP Address • Enter the IP Address for the optiPoint 410/420 here, provided that DHCP server assigns this value dynamically ( DHCP).
  • Page 92 Alphabetical Reference Transport Base/Transport mode • You can specify here whether voice encryption is to be activated or not for calls. Non Secure Mode (voice encryption deactivated) Secure Mode (voice encryption activated) • Default values Page 109. • Only secure connections are possible if cipher mode is set on the HiPath 4000.
  • Page 93 Alphabetical Reference VLAN Method • Can only be defined if Layer 2 support is activated ( QoS L2/L3). • You can specify here from where the Default VLAN ID is to be fetched when using VLANs. Manual The ID entered under Default VLAN ID is used.
  • Page 94 Alphabetical Reference WAP Port Number • Only configurable on optiPoint 410/420 standard/advance and only required if a display module or application module is used. • If a WAP server is available, enter the Port number for communication with this server. •...

  • Page 95: Abbreviations And Specialized Terms

    Abbreviation for "Application Generic Platform" This is a high-level MIDP 1.0 Java MIDlet, which acts as an interface between Siemens IP telephones and back-office systems. The relevant interfaces are displayed on the display module from the XML data received via the MIDlet.
  • Page 96 Alphabetical Reference Abbreviation for "File Transfer Protocol". Used for transferring files in networks, for example to update telephone software Page 61. G.711 Audio protocol for uncompressed voice transmission. Requires a bandwidth of 64 kbit/s. G.722 Audio protocol for uncompressed voice transmission. Requires a bandwidth of 128 kbit/s.
  • Page 97 Alphabetical Reference IP Address Also called " IP" for short. The unique address of a terminal device in the network. It consists of four number blocks of 0 to 255 each, separated by a point. To simplify the notation, meaningful names can be resolved by a DNS into IP addresses.
  • Page 98 Alphabetical Reference Abbreviation for "Light Emitting Diode". Cold light illumination in different colors at low power consumption. Abbreviation for "Medium Access Control Address". A 48-bit address with the help of which a terminal device (e.g. telephone or network card) identifies itself uniquely in a network worldwide.
  • Page 99 Alphabetical Reference Abbreviation for "Random Access Memory". Memory with read / write access. Abbreviation for "Read Only Memory". Memory with read only access. Abbreviation for "File Transfer Protocol". Abbreviation for "Session Initiation Protocol". Protocol standard for initializing calls in IP networks. Self Labeling Key Only for optiPoint 420 Workpoints.
  • Page 100 Alphabetical Reference SNTP Abbreviation for "Simple Network Time Protocol". The protocol is used between time servers and terminal devices in a network to synchronize the time of the terminal devices. Abbreviation for „Signaling & Payload Encryption“ . A security extension for communications systems to encrypt calls (Signaling TLS) and audio data (Payload SRTP/SRTCP).
  • Page 101 Alphabetical Reference Abbreviation for "Wireless Application Protocol". Synonym for graphical applications on mobile telephones, organizers and other suitable terminal devices, transferred in accordance with the protocol of the same name. Abbreviation for "Wireless Session Protocol". Protocol for transferring data to WAP-enabled terminal devices.

  • Page 102: Administration Scenarios

    Administration Scenarios Administration Scenarios Setting up the FTP Server There are several possibilities for performing upload and download operations for the optiPoint 410/420. • With the help of a web interface in an Internet browser (e.g. Internet Explorer), Page 51. •...

  • Page 103: Installation And Configuration

    Administration Scenarios Installation and Configuration 1. Install the software (in the example "3Cserver", which can be downloaded from http://www.3com.com). 2. Start the server program. 3. You can set up user profiles or permit anonymous access, as in this example. This is the simpler variant in which it is not possible to assign different access rights to different users.

  • Page 104: Checking Handset Functionalities

    Administration Scenarios Checking Handset Functionalities • Check whether the plugs at the two ends of the handset cable are inserted correctly (handset engaged) Page 13. • Carry out an Audio Loop Test. – More information on „Audio Loop Test“ Page 70. –...

  • Page 105: Improving Speech Quality

    Administration Scenarios Improving Speech Quality • Change the QoS parameters. – More information on „QoS L2/L3“ Page 86. – Page 24 Page 64 • Increase the "Jitter" buffer time for the optiPoint 410 entry. – More information on „Jitter Buffer“ Page 78.

  • Page 106: Editors

    Editors Editors optiPoint 410 entry only: The edited characters are displayed binary coded on the LEDs of the optiPoint 410 entry Page 113. Number Editor Permitted: Integer values. Specify the numbers. < Press this key to delete one character at a time to the left. In case of negative numbers, press this key to change the prefixed sign.

  • Page 107: Terminal Mask Editor

    Editors Terminal Mask Editor Permitted: 0 Bit (000.000.000.000) to 32 Bit (255.255.255.255). Block 3 Block 2 Block 1 Block 0 0000 0000 0000 0000 0000 0000 0000 0000 1000 0000 0000 0000 0000 0000 0000 0000 1100 0000 0000 0000 0000 0000 0000 0000 1110 0000 0000 0000 0000 0000 0000 0000 29 1111 1111 1111 1111 1111 1111 1111 1000 30 1111 1111 1111 1111 1111 1111 1111 1100...

  • Page 108: Text Editor

    Editors Text Editor Character entry is performed by repeatedly pressing the keypad keys according to the following tables. This also applies to entry of alphanumeric passwords. Example: "+" = press the key 17 times. 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23x "...

  • Page 109: Factory Default Settings

    Factory Default Settings Factory Default Settings Default Values Function Default Value Acoustic filter Administration password 123456 Password Functions Application DL file name ipphone.app Audio mode G.711 always Avg round trip delay threshold C-TC S-Port Base 4061 Cert. Check Base Configuration DL file name OP400-28069 Consecutive good packets Consecutive lost packets...
  • Page 110 Factory Default Settings Function Default Value Lost packet thresholds Max jitter threshold Minimum Session Length 20 (2 sec.) Mobility National Dial Prefix Observation interval Packet Size Auto QCU home address 0.0.0.0 QDC server 12010 QoS L2/L3 QoS Layer 2 Default QoS Layer 2 Voice/Signaling QoS Layer 3 Signaling QoS Layer 3 Voice...

  • Page 111: Password Functions

    Factory Default Settings Password Functions The minimum password length can be predefined in the DLS. Password Explanation User Password Protects the user-specific settings of the optiPoint 410/420. Administrator Password Protects the administration area from unauthorized access ("Configuration" and "Diagnostics"). FTP Password Protects the FTP server from unauthorized access for data transmission (e.g.

  • Page 112: Standard/Advance

    Factory Default Settings Programmable Keys on the optiPoint 410/ 420 economy/economy plus/standard/advance Function HiPath 2000/3000/ Function HiPath 4000 5000/HiPath OpenOffice Program/Service menu Program/Service menu Redial Redial Mute Mailbox Speaker Speaker Call pickup Call park Release Show used line Ringer cutoff...

  • Page 113: Data Visualization (Optipoint 410 Entry )

    Data Visualization (optiPoint 410 entry ) Data Visualization (optiPoint 410 entry ) For error messages on the optiPoint 410 entry, see Page 42. Status Messages Binary Encoded ASCII Table The table illustrates in which way characters are displayed on the LEDs of the optiPoint 410 entry.

  • Page 114: Technical Data

    HiPath 3000/5000 (version 6.0 or higher) and HiPath 4000 (version 3.0 or higher). [2] Only with optiPoint 410/420 economy plus/standard/advance from software version V5 R5.2.0 on HiPath 2000 from V2 R4, HiPath OpenOffice EE from V1, HiPath 3000/5000 from V7 R4 or HiPath 4000 from V4.1...

  • Page 115: Optipoint 410 Entry

    Technical Data optiPoint 410 entry Protocols H.323, H.225, H.245, TCP/IP , FTP , DHCP , SNTP Gatekeeper routed and direct routed call model Voice algorithms G.711 (64 kbit/s), G.723.1 (6.4 kbit/s) Room echo compensation Interfaces IEEE 802.3 Fast Ethernet (10/100 Mbit/s) 2 x RJ 45 TP Pin assignment: LAN receptacle...

  • Page 116: Operation Codes Summary

    Operation Codes Summary Operation Codes Summary On the following pages you will find a list of the reference numbers corresponding to the administration and diagnostics functions in the optiPoint 410/420 economy/economy plus/ standard/advance and the optiPoint 410 entry in the alphabetical order. optiPoint 410/420 Administration Area Function...

  • Page 117: Diagnostics

    Operation Codes Summary Function optiPoint 410/420 economy/ optiPoint 410/420 standard/ Explanation economy plus advance Administration Area) Administration Area) dfdh dfdh Subscriber Password Page 90 dfdi dfdi Fully Qual SubNumber Page 76 dfdj dfdj DLS IP Address Page 74 dfdk >: dfdk >: Transport Base...

  • Page 118: Optipoint 410 Entry

    Operation Codes Summary optiPoint 410 entry Administration Area Function optiPoint 410 entry Explanation Configurations (simult.) Page 21 Configurations Function optiPoint 410 entry dg o r Default Route Page 73 dd o r DHCP IP Assignment Page 74 Factory Reset (simult.) Page 75 de o r Terminal IP Address...

  • Page 119: Menu Structure

    Menu Structure Menu Structure The following tables each provide an overview of the menu structure of the optiPoint 410/ 420. optiPoint 410/420 Menu Operation Explanation Steps |--- Administration? |--- 01=Configuration? |--- 01=Network? |--- 01=DHCP IP assign? Page 22 Page 74 |--- 02=Terminal IP addr.? Page 22 Page 91...
  • Page 120 Menu Structure Menu Operation Explanation Steps |--- 04=Default Router IP? |--- 05=Route 1 Gateway IP? |--- 06=Route 2 Gateway IP? |--- 07=SNMP trap address? |--- 08=Terminal IP addr.? |--- 09=DNS IP addr.? |--- 10=SNTP IP? --- 00=End? |--- 08=Line test? Page 35 Page 82 |--- 09=SLK test?

  • Page 121: Index

    Index Checking handset functionalities Index Checking the LAN connection Clear Screenlock password The colored page numbers lead in each Clear User Data case to the description of the operation at Codec the following device/surface RED: optiPoint 410/420 economy/ Codec Independant Threshold •...
  • Page 122 Index Echo effect Improving speech quality Emergency number Installation ENB Filename Installing the telephone Error messages IP Routing Establishing the software version IP routing Explanations of specialized terms External Access Code Jitter Buffer Factory reset , 109 Default values Key test Displaying key assignment Keypad assignment Password, function...
  • Page 123 Index MAC address QCU Home Address Menu structure QCU Standby Address optiPoint 410/420 QDC server MIB-II Error Count QoS layer options Min. Jitter Buffer Target QoS Protocol Version Minimum session length Quick reference Nameplate RAM test National Dial Prefix Report Interval NETBOOT filename Report Mode NetBoot version...
  • Page 124 Index SNMP Active USB Keyboard Password Use Proxy Server Address Trap Port Specialized terms Visualization on optiPoint 410 entry SRSR VLAN Automatic switch back Enabled Method Switch to home expiry timeout VLAN method Switch to home retry count Switch to standby expiry Timeout TC_TEST expiry timeout Favourites...
  • Page 125 Hofmannstr. 51 80200 München Deutschland Siemens Enterprise Communications GmbH & Co. KG is a Trademark Licensee of Siemens AG Reference No: A31003-A2056-B415-11-76A9 The information provided in this document contains merely general descriptions or char- acteristics of performance which in case of...

This manual is also suitable for:

Hipath 3000Hipath 5000Hipath openofficeOptipoint 410Optipoint 420 familyOptipoint application module ... Show all

Table of Contents