Page 1 Documentation HiPath 2000, HiPath 3000, HiPath 5000 HiPath OpenOffice OpenStage 40, OpenStage 40 G OpenStage Key Module 40 OpenStage Busy Lamp Field 40 User Guide Communication for the open minded Siemens Enterprise Communications www.siemens.com/open...
Page 2: Important Information
Never open the telephone or a key module. Should you en- counter any problems, contact the responsible service per- sonnel. Use only original Siemens accessories. The use of other ac- cessories may be hazardous and will render the warranty, extended manufacturer’s liability and the CE marking in- valid.
Page 3: Location Of The Telephone
LEDs. Product support on the internet Information and support for our products can be found on the Internet at: http://siemens-enterprise.com/. Technical notes, current information about firmware updates, frequently asked questions and lots more can be found on the Internet at: http://wiki.siemens-enterprise.com/.
Page 4: Table Of Contents
Contents Contents Important information ......2 Trademarks ..........2 Location of the telephone .
Page 5 Contents Control and monitoring function ......32 Basic functions ......33 Answering a call .
Page 6 Contents Using callback ..........47 Storing a callback .
Page 7 Voice encryption (only for HiPath 2000/3000/5000/HiPath OpenOffice EE) ... 86 Notes on voice encryption ....... . 86 Turning ringer cutoff on and off.
Page 8 Contents Using a mobile phone number at a random phone ....99 Logging on to the "guest telephone" ......99 .
Page 9 Contents Special functions in the LAN ....123 Leaving hunt group/group call ....... 123 Setting up "follow me"...
Page 10 Contents Troubleshooting......... . 142 Caring for your telephone .
Page 11: General Information
• Your communications platform does not feature this function. Please contact your Siemens sales partner for information on how to upgrade. This user guide is intended to help you familiarize yourself with OpenStage and all of its functions. It contains important information on the safe and proper operation of your OpenStage phone.
Page 12: Intended Use
Voice encryption Your OpenStage 40/40 G, software release 2 (V1 R2.xxxx) and later, sup- ports voice encryption on HiPath 2000/3000/5000 (R 4 and later) and HiPath OpenOffice EE (V1). This allows you to use your OpenStage to per- form tap-proof calls. Voice transmission is encrypted and data is decrypted at the other call party’s phone and vice versa.
Page 13: Multi-Line Telephone, Executive/Secretary Functions
General information Multi-line telephone, executive/secretary functions Your OpenStage 40/40 G is a "multi-line telephone". This means that your service personnel can configure multiple lines on your phone, which is not the case with single-line phones. Each line is assigned an individual phone number which you can use to make and receive calls.
Page 14: Getting To Know Your Openstage Phone
Getting to know your OpenStage phone Getting to know your OpenStage phone The following sections describe the most frequently used operating ele- ments and the displays on your OpenStage phone. The user interface of your OpenStage 40/40 G You can make and receive calls as normal using the handset. The display permits intuitive operation of the phone page 25.
Page 15: Ports On The Underside Of The Phone
Getting to know your OpenStage phone Ports on the underside of the phone Power supply unit Network switch Headset Local cable type Busy Lamp field Handset ey module Properties of your OpenStage 40/40 G OpenStage 40 G LCD display, 40 x 6 characters Illuminated display Programmable sensor keys Full-duplex speakerphone function...
Page 16: Using Network Ports More Efficiently
Getting to know your OpenStage phone Using network ports more efficiently OpenStage 40 has a built-in 10/100 Mbps Ethernet switch. OpenStage 40 G has a 1000 Mbps Ethernet switch. This means that you can connect a PC to the LAN directly via the phone. The telephone-PC con- nection option must first be activated on the telephone by service person- nel.
Page 17: Key Module
Getting to know your OpenStage phone Key Module OpenStage Key Module 40 The OpenStage Key Module 40 is a key module attached to the side of the phone that provides 12 additional illuminated, programmable keys. Like keys on the phone, these keys can be programmed and used accord- ing to your needs page 22.
Page 18: Openstage Key Module 15
Getting to know your OpenStage phone OpenStage Key Module 15 The OpenStage Key Module 15 is a key module attached to the side of the phone that provides an additional 18 illuminated, programmable sensor keys. Like keys on the phone, these keys can be programmed and used accord- ing to your needs You can only attach one OpenStage Key Module 15 to your OpenStage 40.
Page 19: Openstage Busy Lamp Field 40
Alternatively, you can use the Key Labeling Tool to conveniently create new label strips. You can find this including instructions at http://wiki.siemens- enterprise.com/index.php/Key_Labelling_Tool Lay the labeled strips on the key fields and place the transparent cover over...
Page 20: Keys
Getting to know your OpenStage phone Keys Function keys Function when key is pressed End (disconnect) call page 40. Redialing page 39. Button for call forwarding (with red LED key) page 43. Open mailbox (with red LED key) page 29. Open Program/Service menu (with red LED key) page 31.
Page 21: 5-Way Navigator
Getting to know your OpenStage phone 5-way navigator Remove the protective film from the ring around the 5-way naviga- tor before using the phone. With this control, you can manage most of your phone’s functions, as well as its displays. Operation Functions when key is pressed In idle mode:...
Page 22: Programmable Sensor Keys
Getting to know your OpenStage phone Programmable sensor keys Your OpenStage 40/40 G has six illuminated sensor keys. You can assign functions and phone numbers to them on two levels. Increase the number of programmable sensor keys by connecting a key module page 17.
Page 23: Keypad
Getting to know your OpenStage phone Keypad In cases where text input is possible, you can use the keypad to input text, punctuation and special characters in addition to the digits 0 to 9 and the hash and asterisk symbols. To do this, press the numerical keys repeatedly. Example: To enter the letter "h", press the number key on the keypad twice.
Page 24 Getting to know your OpenStage phone Text input The current label appears on the first line. Delete it with the key before entering new characters. Enter the required characters via the keypad. Select the functions using the keys Confirm your entry with Example: Changing the key label page 81.
Page 25: Display
Getting to know your OpenStage phone Display Your OpenStage 40/40 G comes with a tilt-and-swivel black-and-white LCD display. Adjust the tilt and contrast to suit your needs page 129. Idle mode If there are no calls taking place or settings being made, your OpenStage 40/40 G is in idle mode.
Page 26 Getting to know your OpenStage phone Idle menu When in idle mode, press a key on the 5-way navigator page 21 to dis- play the idle menu. You can call up various functions here. The idle menu includes selected functions from the Program/Service menu page 31.
Page 27: Telephony Dialogs
Getting to know your OpenStage phone Telephony dialogs Connection-dependent conditions and situations, e.g. when your tele- phone rings, when dialing a number, or during a call, are depicted graphi- cally on the display. Situation-dependent functions that automatically appear on the display can be selected and activated with the 5-way navigator page 21.
Page 28 Getting to know your OpenStage phone Appearance during an ongoing call Example: You are connected with a caller. Icon indicating call status Smith Michael 3:16 Call duration 100168 Current connection M0023Consultation Options relevant to situation; scroll M0025Start conference bar shows that more options are M0103Start transfer available.
Page 29: Mailbox
Getting to know your OpenStage phone Mailbox Depending on the type and configuration of your communications platform (contact the relevant service personnel), messages from services such as HiPath Xpressions are displayed in this application in addition to messages received. Messages You can send short text messages to individual internal stations or groups.
Page 30: Caller List
Getting to know your OpenStage phone Caller list If you are unable to accept an external or internal call, the call attempt is stored in the caller list. You can also store external calls that you have answered in the caller list (contact your service personnel).
Page 31: Program/Service Menu
Getting to know your OpenStage phone Program/Service menu Use the menu key to reach the Program/Service menu for your com- munication system. The LEDs associated with the menu key and the loudspeaker stay red as long as you are in the menu. Example: T0284Program/Service: H1875Destinations...
Page 32: Control And Monitoring Function
Getting to know your OpenStage phone Control and monitoring function A control or monitoring function can be activated on your phone for service purposes by remote maintenance. Control function Service personnel have the option to activate and deactivate features of the phone via remote maintenance.
Page 33: Basic Functions
Basic functions Step by Step Basic functions Please read the introductory chapter "Getting to know your OpenStage phone" page 14 care- fully before performing any of the steps de- scribed here on your phone. Answering a call Your OpenStage phone rings with the tone signal set when an incoming call is received.
Page 34: Answering A Call Via The Loudspeaker (Speakerphone Mode)
Basic functions Step by Step Answering a call via the loudspeaker (speakerphone mode) Suggestions for using speakerphone mode • Tell the other party that you are using speakerphone mode. • The speakerphone works bests at a low receiving volume. • The ideal distance between the user and the tele- phone set in speakerphone mode is about 50 cm (approx.
Page 35: Switching To The Handset
Basic functions Step by Step if nec. Set the call volume. Keep pressing the key until the de- sired volume is set. U.S. mode If the country setting is set to U.S. (ask the service per- sonnel), you do not have to hold down the loudspeaker key when replacing the handset to switch to speaker- phone mode.
Page 36: Making Calls
Basic functions Step by Step Making calls Off-hook dialing Lift the handset. Internal calls: Enter the station number. External calls: Enter the external code and the station number. Pay attention to the notes on voice encryption page 86. The called party does not answer or is busy Replace the handset.
Page 37: Dialing With The Headset Connected
Basic functions Step by Step Dialing with the headset connected Prerequisite: The headset is connected. internal: Enter the station number. External calls: Enter the external code and the station number. The headset key lights up. The connection is established as soon as your input is complete.
Page 38: Dialing With Dds Keys
Basic functions Step by Step Dialing with DDS keys Prerequisite: You have saved a number on a DDS key page 80. Press the key with a saved number. If the number is saved on the second layer, press the shift key first. Pay attention to the notes on voice encryption page 86.
Page 39: Redialing A Number
Basic functions Step by Step Redialing a number The last ten external telephone numbers dialed are stored automatically. If this feature is configured (contact your service personnel), account codes entered are also saved page 85. You can redial them simply by pressing a key. Displaying and dialing saved station numbers Press the key once to dial the last number dialed.
Page 40: Ending A Call
Basic functions Step by Step Ending a call Replace the handset. Press the key shown. Rejecting calls You can reject calls which you do not wish to take. The call is then signaled at another definable telephone (contact your service personnel). The phone is ringing.
Page 41: Calling A Second Party (Consultation)
Basic functions Step by Step Calling a second party (consultation) You can call a second party while a call is in progress. The first party is placed on hold. M0023Consultation Confirm. Call the second party. Pay attention to the notes on voice encryption page 86.
Page 42: Transferring A Call
Basic functions Step by Step Transferring a call If the person you are speaking to wants to talk to anoth- er colleague of yours, you can transfer the call that col- league. M0023Consultation Confirm. Enter the number of the party to which you want to transfer the call.
Page 43: Call Forwarding
Basic functions Step by Step Call forwarding Using variable call forwarding You can immediately forward internal or external calls to different internal or external telephones (destinations). (External destinations require special configuration in the system.) When call forwarding is active, a special dial tone sounds when you lift the handset.
Page 44: Using Call Forwarding No Reply (Cfnr)
Basic functions Step by Step Using call forwarding no reply (CFNR) Calls that are not answered after three rings (=default, can be adjusted by service personnel) or that are re- ceived while another call is ongoing can be automatical- ly forwarded to a specified telephone. Open the Program/Service menu page 31.
Page 45: Call Forwarding In The Event Of Telephone Failure (Cfss)
Basic functions Step by Step Call forwarding in the event of telephone failure (CFSS) If configured (consult your service personnel), you can define an internal or external call forwarding destination that activates in the event of telephone failure. Open the Program/Service menu page 31.
Page 46: Call Forwarding In The Carrier Network And Forwarding Multiple Subscriber Numbers (Msn) (Not For U.s.)
Basic functions Step by Step Call forwarding in the carrier network and forwarding multiple subscriber numbers (MSN) (not for U.S.) If this function has been configured (contact your ser- vice personnel), you can forward calls to your assigned multiple subscriber number (MSN) (DID number) direct- ly within the carrier network.
Page 47: Using Callback
Basic functions Step by Step Using callback You can request a callback if the internal station called is busy or if nobody answers. This also applies for external calls via ISDN exchanges. This feature saves you from having to make repeated attempts to reach the user. You receive a callback •...
Page 48: Viewing And Deleting A Stored Callback
Basic functions Step by Step Viewing and deleting a stored callback if nec. Press the programmed sensor key "K1912Callback". Open the idle menu page 26. M0030View callbacks Select and confirm the option shown M0050Next callback Select and confirm to display additional entries. Deleting a displayed entry M0049Delete Confirm.
Page 49: Enhanced Phone Functions
Enhanced phone functions Step by Step Enhanced phone functions Answering calls Accepting a call with the headset Prerequisite: The headset is connected. The LED flashes when a call is received. Press the key shown. The LED lights up. M0066Answer Confirm. Make sure your headset port is set up properly page 132.
Page 50: Using The Speakerphone
Enhanced phone functions Step by Step Press the flashing key. Pay attention to the notes on voice encryption page 86. Accepting a call in a team page 120. Using the speakerphone A colleague addresses you directly over the speaker with a speaker call. You hear a tone before the an- nouncement.
Page 51: Answering Calls From The Entrance Telephone And Opening The Door51
Enhanced phone functions Step by Step Answering calls from the entrance telephone and opening the door If an entrance telephone has been programmed, you can use your telephone to speak to someone at the en- trance telephone and to activate a door opener. If you have the proper authorization (contact your ser- vice personnel), you can activate the door opener, en- abling visitors to open the door themselves by entering...
Page 52: Accepting A Call From An Answering Machine
Enhanced phone functions Step by Step Opening the door with a code (at the door) After ringing the bell, enter the five-digit code (using the keypad or a DTMF transmitter). Depending on how the door opener has been programmed, a doorbell call sig- nal may or may not be forwarded.
Page 53: Making Calls
Enhanced phone functions Step by Step Making calls En-bloc dialing If "en-bloc dialing" ( page 133) is activated, the con- nection to the entered number is only set up when you have confirmed "Dial". Internal calls: Enter the station number. External calls: Enter the external code and the station number.
Page 54: Using The Caller List
Enhanced phone functions Step by Step Using the caller list Detailed information, as well as a sample display entry are provided on page 30. Retrieving the caller list Prerequisite: Service personnel has set up a caller list for your telephone. Open the idle menu page 26.
Page 55: Dialing A Number From The Internal Directory
Enhanced phone functions Step by Step Removing an entry from the caller list Prerequisite: You are viewing the detailed view of a call. M0049Delete Select and confirm the option shown. Dialing a number from the internal directory The internal directory contains all station numbers and system speed-dial numbers assigned to a name.
Page 56: Using The Ldap Directory
Enhanced phone functions Step by Step Using the LDAP directory If configured (ask your service personnel), you can search for directory data in the LDAP database and dial the number of any subscriber you find there. Prerequisite: The LDAP search feature has been con- figured in the system.
Page 57 Enhanced phone functions Step by Step The result is displayed If only one name is found, it is displayed. M0079Call Confirm. If several names are found (max. 50), the first name is displayed. Press M0231Scroll Next select and confirm the option shown M0232Scroll Previous select and confirm the option shown.
Page 58: Making Calls Using System Speed-Dial Numbers
Enhanced phone functions Step by Step Making calls using system speed-dial numbers Prerequisite: You know the system speed-dial num- bers (consult your service personnel). Open the Program/Service menu page 31. M0070Use speed dialing Select and confirm the option shown Enter a three-digit speed-dial number. Pay attention to the notes on voice encryption page 86.
Page 59: Talking To Your Colleague With A Speaker Call
Enhanced phone functions Step by Step M0010Change Speed Dial Select and confirm the option shown Press the key shown. Press the required speed-dial key. If the key is already in use, the programmed phone number appears on the screen. M0051Change Confirm.
Page 60: Talking To Your Colleague With Discreet Calling
Enhanced phone functions Step by Step Talking to your colleague with discreet calling If this function has been configured (ask your service personnel), you can join an ongoing call conducted by an internal user at a system telephone with display. You can listen in unnoticed and speak to the internal user without being overheard by the other party (dis- creet calling).
Page 61: Assigning A Station Number (Not For U.s.)
Enhanced phone functions Step by Step Assigning a station number (not for U.S.) If this function has been configured (contact your ser- vice personnel), you can selectively assign a specific number (DID number) to your telephone before making an external call. The assigned number then appears on the called party’s display.
Page 62: During A Call
Enhanced phone functions Step by Step During a call Using call waiting (second call) Callers can still reach you while you are engaged in an- other call. A signal alerts you to the waiting call. You can ignore or accept the second call. When you accept the waiting call, you can either end the first call or place it on hold and resume the call later You can block the second call or the signal tone...
Page 63: Preventing And Allowing Call Waiting (Automatic Camp-On)
Enhanced phone functions Step by Step Preventing and allowing call waiting (automatic camp-on) If this function has been configured (ask your service personnel), you can prevent or allow a second call page 62 from being signaled by automatic camp-on during an ongoing call. Open the Program/Service menu page 31.
Page 64: Parking A Call
Enhanced phone functions Step by Step Parking a call You can park up to ten calls, either internal, external, or both. Parked calls can be displayed on and picked up from another telephone. This feature is useful if you want to continue a call at another phone. Prerequisite: You are conducting a call.
Page 65: Holding External Calls
Enhanced phone functions Step by Step Holding external calls If you have programmed a hold key on your phone page 73, you can put external calls on hold. Then all other stations can accept the call on the as- signed trunk. Press the "K1920Hold"...
Page 66: Conducting A Conference
Enhanced phone functions Step by Step Conducting a conference In a conference call, you can talk to as many as four oth- er parties at the same time. These may be internal or external users. You can only add parties to or remove them from a conference if you initiated the conference.
Page 67: Activating Tone Dialing/Dtmf Suffix-Dialing
Enhanced phone functions Step by Step Leaving a conference M0028Conference Confirm. M0156Leave conference Select and confirm the option shown. Replace the handset, if this feature is configured (con- tact your service personnel). Ending a conference M0028Conference Confirm. M0183End conference Select and confirm the option shown. Replace the handset, if this feature is configured (con- tact your service personnel).
Page 68: Recording A Call
Enhanced phone functions Step by Step Recording a call If configured (contact your service personnel for de- tails), you can record an active call. Prerequisite: You are on a call, the "K1040Recording" key is configured page 73. Press the "K1040Recording" key. The LED lights up. You and the other party hear an announcement that re- cording has started and as long as recording is still run- ning, you hear an acoustic signal approx.
Page 69: Transferring A Call After A Speaker Call Announcement In A Group
Enhanced phone functions Step by Step Transferring a call after a speaker call announcement in a group If this function has been configured (contact your ser- vice personnel), you can use a speaker call (announce- ment, page 118) to announce a call in progress to a group of users page 59.
Page 70: Sending A Trunk Flash
Enhanced phone functions Step by Step Sending a trunk flash To activate ISDN-type services and features through the network carrier’s analog trunks or those of other com- munications platforms (such as "consultation hold"), you must send a signal to the trunks before dialing the ser- vice code or telephone number.
Page 71: If You Cannot Reach A Destination
Enhanced phone functions Step by Step If you cannot reach a destination Call waiting (camp-on) Prerequisite: You have dialed an internal number and hear a busy signal. It is important that you reach the called party. T0326Camp-on Wait (approx. 5 seconds) until "T0326Camp-on" appears on the display and the busy tone is followed by the ring tone.
Page 72: Using Night Answer
Enhanced phone functions Step by Step Using night answer When night answer mode is active, for example during a lunch break or after office hours, all external calls are immediately forwarded to a specific internal telephone (night station). The night station can be defined by ser- vice personnel ( standard night answer service) or by you ( temporary night answer service).
Page 73: Programming Sensor Keys
Programming sensor keys Step by Step Programming sensor keys You can program frequently used functions, station numbers or procedures on your OpenStage 40/40 G’s sensor keys. Configuring function keys See also page 22. A list of all available functions is displayed, see the overview page 74.
Page 74: Overview Of Functions
Programming sensor keys Step by Step Overview of functions The functions are split into the following menus: • H1875Destinations • H1877Feature Settings • H1879PIN and Authorization • M2050Calls • M0096More features The available functions depend on your configu- ration. If a function is missing, contact your ser- vice personnel.
Page 75 Programming sensor keys Step by Step Flashing quickly - call on the relevant trunk, call pickup is possible by pressing the sensor key. Flashing slowly - a call is placed on hold on the relevant trunk.
Page 76 Programming sensor keys Step by Step M0193Trunk group key: At least one trunk is free. All lines in this trunk group are occupied. M0207View call charges: No chargeable calls have been set up since the last check. Chargeable calls have been set up since the last check. M0039Call forwarding, M0249Forward Line: Flashing slowly - your line is a call forwarding destina- tion.
Page 77 Programming sensor keys Step by Step M0023Consultation, M0129Associated dial, M0135Associated serv., M0185Tel. data service, M0257 M1029Mobile Login,S1164 Discreet Call.
Page 78: Programming A Procedure Key
Programming sensor keys Step by Step Programming a procedure key Numbers and functions which require further input, i.e. which contain several operating steps, can be saved on a key on your telephone. The relevant service personnel must be granted appropriate authorization. For example the function "Associated dial"...
Page 79 Programming sensor keys Step by Step M0038Another key Select and confirm the option shown. Select the saved procedure by pressing the key. Procedures with activatable/deactivatable func- tions are activated with one press of the button and deactivated with the next. You can press the procedure key during a call to automatically send the saved digits as DTMF sig- nals...
Page 80: Configuring Repdial Keys
Programming sensor keys Step by Step Configuring repdial keys You can also program internal and external station num- bers on the second level. The LED function is not avail- able for internal station numbers on the second level. To program the second level, you must program a "Shift" page 73.
Page 81: Changing The Label
Programming sensor keys Step by Step Changing the label The label set when a repdial key was programmed can also be subsequently changed. You cannot change the labels on function keys. Changing the label Hold down the key shown. M0001Assign telephony func- Confirm.
Page 82: Deleting Sensor Key Programming
Programming sensor keys Step by Step Deleting sensor key programming Deleting a function/phone number/label Press and hold the required sensor key. M0046Clear key Select and confirm the option shown.
Page 83: Displaying And Assigning Call Charges
Displaying and assigning call charges Step by Step Displaying and assigning call charges Displaying call charges (not for U.S.) For the current call Call charges are shown by default on the display when a call ends. If you want to display call charges as they occur during a chargeable call, your service personnel must request this option from the network operator.
Page 84: Displaying Call Charges For Another Telephone (Not For U.s.)
Displaying and assigning call charges Step by Step Displaying call charges for another telephone (not for U.S.) If configured (contact your service personnel), you can also display and print out information on chargeable calls for other phones (such as a pay phone). Prerequisite: You have programmed the function "M0011Show call charges"...
Page 85: Dialing With Call Charge Assignment
Displaying and assigning call charges Step by Step Dialing with call charge assignment You can assign external calls to certain projects. Prerequisite: Your service personnel have defined ac- count codes for you. Open the Program/Service menu page 31. M2050Calls Select and confirm the option shown. M0061Account code Select and confirm the option shown Enter the account code.
Page 86: Privacy/Security
Privacy/security Step by Step Privacy/security Voice encryption (only for HiPath 2000/3000/5000/ HiPath OpenOffice EE) Please see also the explanations on page 12. Notes on voice encryption Unencrypted connection warning Your service personnel can define on your communica- tion system whether you are notified of unencrypted calls and how.
Page 87: Turning Ringer Cutoff On And Off
Privacy/security Step by Step Turning ringer cutoff on and off If you do not wish to take calls, you can activate the ring- er cutoff function. Calls are only identified by one ring signal, an indication on the display, and a key which has been programmed to flash (such as a trunk key).
Page 88: Caller Id Suppression
Privacy/security Step by Step Caller ID suppression You can prevent your station number or name from ap- pearing on the displays of external parties you call. The feature remains active until you deactivate it. Activating Open the idle menu page 26. M0151Suppress call ID Select and confirm the option shown.
Page 89: Monitoring A Room
Privacy/security Step by Step Monitoring a room You can use a phone to monitor a room. This function must be enabled on the monitoring phone. When you call this phone, you can immediately hear what is happening in that room. Activating the telephone to be monitored Open the Program/Service menu page 31.
Page 90: Locking The Telephone To Prevent Unauthorized Use
Privacy/security Step by Step Locking the telephone to prevent unau- thorized use You can prevent unauthorized parties from using your phone during your absence. You can see whether the function is activated or deacti- vated from the corresponding icon in the status bar on the display page 25.
Page 91: Locking Another Telephone To Prevent Unauthorized Use
Privacy/security Step by Step Locking another telephone to prevent unauthorized use If configured (contact your service personnel), you can lock and unlock other telephones to prevent unautho- rized access. If a phone user locks his or her phone and forgets the personal lock code, you can use this function to unlock the phone.
Page 92: Saving Your Pin
Privacy/security Step by Step Saving your PIN Enter a personal code to use the functions • for protecting your phone against unauthorized use page 90 • for using another telephone like your own page 98. You can save this code. If you forget your code, contact your service per- sonnel to have the default code restored.
Page 93: More Functions/Services
More functions/services Step by Step More functions/services Appointments function You can configure your phone to call you to remind you about appointments page 94. You must save the required call times. You can enter a single appointment that will take place in the next twenty four hours or you can enter a daily recurring ap- pointment.
Page 94: Using Timed Reminders
More functions/services Step by Step Using timed reminders Prerequisite: You have saved a reminder page 93. The saved time arrives. T1206Reminder at 1200 The phone is ringing. The appointment time is dis- played. Press key twice. Lift the handset and replace it again. If you do not answer the timed reminder, it is re- peated five times and then deleted.
Page 95: Viewing And Editing Incoming Messages
More functions/services Step by Step Displaying and deleting messages you have sent Prerequisite: The recipient has not yet accepted a sent message. Open the idle menu page 26. M0115View sent message Select and confirm the option shown. M0074Message sent Confirm. The text message is displayed.
Page 96: Leaving An Advisory Message
More functions/services Step by Step Leaving an advisory message You can leave messages/advisory messages on your phone’s display for internal callers that wish to contact you in your absence. When you receive a call, the message appears on the caller’s display. Open the idle menu page 26.
Page 97: Displaying The Number Of Waiting Calls/Overload Display
More functions/services Step by Step Displaying the number of waiting calls/ overload display You can show the number of external waiting calls on the display if you programmed the "M0017View number of calls" key page 73. Press the "K1940 Calls in Q" key. If the number of waiting calls exceeds a preset limit while you are engaged in another call (overload), the LED on the key lights up.
Page 98: Using Another Telephone Like Your Own For A Call
More functions/services Step by Step Using another telephone like your own for a call Other parties can temporarily use your phone like their own for an outgoing call. Open the Program/Service menu page 31. H1879PIN and Authorization Select and confirm the option shown. M0244Temporary Phone Select and confirm the option shown Enter the number of the other user.
Page 99: Using A Mobile Phone Number At A Random Phone
More functions/services Step by Step Using a mobile phone number at a random phone You can program a mobile phone number that was set up especially for you by your service personnel at a sys- tem-based OpenStage phone of your choice. The origi- nal "guest telephone"...
Page 100: Moving The Connection To The Next Telephone
More functions/services Step by Step Moving the connection to the next telephone If you want to move your connection from the first "guest telephone" to a second "guest telephone", log onto the second "guest telephone" in the usual fashion (see page 99).
Page 101: Fax Details And Message On Answering Machine
More functions/services Step by Step Fax details and message on answering machine If a fax or answering machine is connected to your sys- tem and you have assigned the "M0162Fax details" function to a programmable key page 73, the key lights up when a fax or a message has been received.
Page 102: Activating Functions For Another Telephone
More functions/services Step by Step Activating functions for another tele- phone If configured (contact your service personnel), you can activate and deactivate the following functions for other phones (associated service): • Do not disturb, code: 97/#97 page 87 • Call forwarding, code 13, #1 page 43 •...
Page 103: Using System Functions From Outside Disa (Direct Inward System Access)
More functions/services Step by Step Using system functions from outside DISA (direct inward system access) If configured (contact your service personnel), you can use an external phone like an internal station to set up an outgoing external connection via the system. You can also activate or deactivate the following system functions: •...
Page 104: Using Functions In Isdn Via Code Dialing (Keypad Dialing)
Contact your network provider to find out which ISDN functions can be code-operated in your country. Siemens Enterprise Communications GmbH & Co. KG shall not be liable for damages/ costs which may be incurred by fraudulent activ- ities or remote operation (such as toll fraud).
Page 105: Controlling Connected Computers/Programs/Telephone Data Service
More functions/services Step by Step Controlling connected computers/ programs/telephone data service If this function has been configured (contact your ser- vice personnel), you can control connected computers or programs running on them, such as hotel services or information systems, from your telephone. Prerequisite: You have set up a connection.
Page 106: Communicating With Pc Applications Over A Csta Interface
More functions/services Step by Step Communicating with PC applications over a CSTA interface If configured (contact your service personnel), you can use your phone to communicate with PC applications (CSTA = Computer Supported Telecommunications Applications). You send information to the application and receive information from the application, for example, via your phone display.
Page 107: Controlling Relays (Only For Hipath 3000)
More functions/services Step by Step Controlling relays (only for HiPath 3000) If this function has been configured (contact your ser- vice personnel), you can use up to four relays to enable/ disable different devices (such as a door opener). Depending on how you program the relays, you can ac- tivate and deactivate them manually them or configure them to activate and deactivate automatically (after tim- eout).
Page 108: Radio Paging (Not For U.s.)
More functions/services Step by Step Radio paging (not for U.S.) If radio paging equipment (PSE) is connected to your system (contact your service personnel), you can locate people via their pocket receivers. Pocket receivers signal a call request to the person you want to page.
Page 109: Making Calls In The Team/Executive/Secretary
Making calls in the team/executive/secretary configuration Step by Step Making calls in the team/ executive/secretary configuration If configured (consult your service personnel), you be- long to a team of subscribers with multiple lines (multi- line page 13). Your phone features trunk keys (MU- LAP keys) page 110.
Page 110: Line Seizure
Making calls in the team/executive/secretary configuration Step by Step Line seizure Line seizure must be configured (consult your service personnel). If automatic line seizure is configured, a trunk is automatically assigned when you lift the hand- set or press the trunk key. Trunk keys The programmable sensor keys on multi-line phones function as trunk keys.
Page 111: Answering Calls With The Trunk Keys
Making calls in the team/executive/secretary configuration Step by Step Answering calls with the trunk keys Prerequisite: Your telephone rings or the trunk key flashes quickly. if nec. Press the trunk key that is flashing quickly (not necessary if "Prime Line" is active). Lift the handset.
Page 112: Making Calls On Multiple Lines Alternately
Making calls in the team/executive/secretary configuration Step by Step Making calls on multiple lines alternately Prerequisite: You are conducting a call via one of your group’s trunks. Another trunk key is flashing. Press the flashing trunk key. The first call party is on hold on the other trunk.
Page 113: Direct Station Selection Key
Making calls in the team/executive/secretary configuration Step by Step Direct station selection key Each team member has a direct station selection key for every other team member. This means that each team member can be reached di- rectly by other team members at the touch of a button. Understanding LED messages from DSS keys LED on the DSS key is off - the team member is not en- gaged in a phone call.
Page 114: Transferring A Call In Progress
Making calls in the team/executive/secretary configuration Step by Step Transferring a call in progress Press the DSS key and announce the call if necessary. Replace the handset. Press the key shown. Accepting a call for another team member Press the flashing DSS key or trunk key. Lift the handset.
Page 115: Forwarding Calls On Trunks
Making calls in the team/executive/secretary configuration Step by Step Forwarding calls on trunks You can immediately forward internal or external calls to different internal or external telephones (destinations). (External destinations require special configuration in the system). Activating call forwarding for one trunk activates the function for all trunk keys assigned to this trunk in your group.
Page 116 Making calls in the team/executive/secretary configuration Step by Step Deactivating call forwarding Open the Program/Service menu page 31. M0252Forward Line: Off Select and confirm the option shown. Press the required trunk key. Enter the required trunk number. If available, press the "K1952CFW MULAP" key. If you have activated call forwarding for a trunk, a special dial tone sounds when the line is seized.
Page 117: Transferring Calls Directly To The Executive Phone
Making calls in the team/executive/secretary configuration Step by Step Transferring calls directly to the executive phone Normally, all calls for the executive are audibly signaled only by the secretary phone. You can set audible signaling so calls are signaled only by the executive phone or by a second phone assigned to it.
Page 118: Using Team Functions
Using team functions Step by Step Using team functions If configured (consult your service personnel), your tele- phone is part of a team. The team consists of internal phones that are able to use certain functions. Activating/deactivating a group call Special features must be taken into consider- ation if your telephone operates with HiPath 5000 (system networking via PC net-...
Page 119 Using team functions Step by Step You belong to multiple groups or to one group with trunk keys (including executive/secretary configu- ration). Open the idle menu page 26. M0139Leave group Select and confirm the option shown M0140Join group select and confirm the option shown. Press the "K1958Hunt group"...
Page 120: Accepting A Call For Another Member Of Your Team
Using team functions Step by Step Accepting a call for another member of your team You can use your own telephone to accept calls for oth- er telephones in your team, even while engaged in an ongoing call. To do this, contact your service personnel to find out if a pickup group has been configured.
Page 121: Uniform Call Distribution (Ucd)
Using team functions Step by Step Uniform Call Distribution (UCD) If configured (consult your service personnel), you may belong to a group of stations (agents), to which calls are distributed. An incoming call is always assigned to the agent idle the longest.
Page 122 Using team functions Step by Step Requesting and activating a work time You can request/activate work time to ensure you have enough time to wrap up the last call. Your phone is ex- cluded from call distribution for a set period or until you log back on.
Page 123: Special Functions In The Lan
HiPath OpenOffice ME can not be operated in a HiPath 5000 environment. Leaving hunt group/group call Prerequisite: You are part of a hunt group/group call page 118 in another HiPath 2000/HiPath 3000/ HiPath OpenOffice EE. Open the idle menu page 26.
Page 124: Setting Up "Follow Me" Call Forwarding
Open the idle menu page 26. M0261DISA intern Select and confirm the option shown. (DISA) station number of your HiPath 2000/ HiPath 3000/HiPath OpenOffice EE. Confirm your entry. Enter the (DISA) station number of your phone. Confirm your entry.
Page 125: Using Night Answer
Open the idle menu page 26. M0261DISA intern Select and confirm the option shown. Enter the (DISA) station number of the HiPath 2000/ HiPath 3000/HiPath OpenOffice EE where the night an- swer phone is connected. Confirm your entry. Enter the (DISA) station number of the phone you are using to activate/deactivate night answer.
Page 126: Ringing Group
Step by Step Ringing group You can have calls for your telephone signaled audibly at external telephones or at telephones in other HiPath 2000/HiPath 3000/HiPath OpenOffice EE com- munications platforms page 118. Saving, displaying, and deleting telephones for the ringing group Open the Program/Service menu page 31.
Page 127: Controlling Relays (Only For Hipath 3000)
Special functions in the LAN Step by Step Controlling relays (only for HiPath 3000) If this feature is configured (contact your service person- nel), you can also control relays page 107 in other HiPath 3000 communications platforms. M0261DISA intern Select and confirm the option shown. Enter the (DISA) station number of the HiPath 3000 where you wish to control the relay.
Page 128: Opening A Door
Open the idle menu page 26. M0261DISA intern Select and confirm the option shown. Enter the (DISA) station number of the HiPath 2000/ HiPath 3000/HiPath OpenOffice EE where you wish to control the relay. Confirm your entry. Enter the (DISA) station number of the phone you wish to use to control the relay.
Page 129: Individual Phone Configuration
Individual phone configuration Step by Step Individual phone configuration Adjusting display settings Adjusting the display to a comfortable read- ing angle You can swivel the display unit. Adjust the display unit so that you can clearly read the screen. Setting contrast The display has four contrast levels that you can set ac- cording to your light conditions.
Page 130: Adjusting Audio Settings
Individual phone configuration Step by Step Adjusting audio settings Optimize the audio settings on your OpenStage for your environment and according to your personal require- ments. Adjusting the receiving volume during a call You are conducting a call. Raise or lower the volume. Keep pressing the key until the desired volume is set.
Page 131: Adjusting The Attention Ring Volume
Individual phone configuration Step by Step Adjusting the attention ring volume If you are part of a team with trunk keys, other calls can be signaled acoustically in the team during a call. You will hear the attention ring. Press one of the keys shown in idle mode page 25.
Page 132: Setting Headset Port Use
Individual phone configuration Step by Step Setting headset port use Here you set whether you are using a wired or cordless DECT headset. z You can also configure this setting via the Web interface page 137. Press the key Benutzer Confirm.
Page 133: Local Dialing
Individual phone configuration Step by Step Local dialing If "local dialing" is activated, you can delete characters with the return key and re-enter them when entering a number. The connection is only set up when you have confirmed "Dial". z You can also configure this setting via the Web interface page 137.
Page 134: Language For System Functions
Individual phone configuration Step by Step Language for system functions Open the Program/Service menu page 31. M0096More features Select and confirm the option shown. S0504Select language Confirm. S0614Spanish Select the language you wish to use (such as "S0614Spanish") and press the "OK" dialog key to con- firm.
Page 135: Testing The Phone
Testing the phone Step by Step Testing the phone Phone functions, testing You can test your phone’s functionality. Prerequisite: The phone is in idle mode. Open the Program/Service menu page 31. M0102Phone test Select and confirm the option shown. If everything is functioning correctly: •...
Page 136: Differing Display View
In addition, display texts may differ from those de- scribed in this document according to the system con- figuration. The following table provides an overview: HiPath 2000/ HiPath 3000/ HiPath 4000 display Description HiPath OpenOffice display...
Page 137: Web Interface (Wbm)
Web interface (WBM) General You can configure a number of settings for your phone via the Web inter- face. Communication is via a secure HTTPS connection. Calling up the Web interface You can obtain the IP address from your service personnel To call up the interface, open a Web browser and enter the following: https://[IP address of the phone] [IP address of the phone] is the IP address of your phone.
Page 138: User Pages
User pages The Web interface homepage opens once you have entered and confirmed the phone’s IP address: User menu User selection Phone information User login Highlighted entry (current page) Menu heading Menu entry 1. Click a menu heading to display the individual menu entries. Click the menu heading again to close the menu.
Page 139: User Menu
User menu All settings that you can make via the Web interface’s user menu can also be made via the phone’s user menu Benutzerseiten Benutzer-Login V Authentifizierung – Altes Passwort – Neues Passwort V – Passwort bestätigen Audio – Einstellungen –...
Page 140: Fixing Problems
Fixing problems Step by Step Fixing problems Responding to error messages on the screen Invalid entry Possible cause: Station number is incorrect. Possible reaction: Enter correct station number. Not authorized Possible cause: Locked function selected. Possible reaction: Apply to service personnel for authorization for relevant function.
Page 141: Contact Partner In The Case Of Problems
Fixing problems Step by Step Key affects other layer Possible cause 1: If "Clear other layer" appears on the menu: you tried to program a function or internal station num- ber with LED on a key that is already programmed on the second layer (for example, external station number).
Page 142: Troubleshooting
Fixing problems Step by Step Troubleshooting Pressed key does not respond Check if the key is stuck. Telephone does not ring Check whether the "Do not disturb" function is activated on your telephone ("Do not disturb" appears on the screen page 25).
Page 143: Labeling Keys
• With a computer via the Internet: You can find the "online labeling tool" together with the user interface at http://wiki.siemens-enterprise.com/index.php/ Key_Labelling_Tool • Select the appropriate key labeling tool in your lan- guage. You can use the tool online via the browser...
Page 144: Index
Index Index retrieving from park ......64, 65 transfer after announcement ....69 transferring ........42, 114 using DSS keys in a team ....113 Numerics Call charge assignment ......85 5-way navigator .......... 21 Call charges for another telephone ......
Page 145 Index Dialing programming ........... 73 from the caller list Function keys ........54 ..........20 internal/external calls Functions ......36 on-hook dialing activating/deactivating for another tele- ........36 using DDS keys phone ........37 ............. 102 with DDS keys programming on a key ........
Page 146 Index Operating steps programming on a key ......78 LAN telephony .......... 123 Outgoing calls ..........30 LDAP telephone database ......56 Overload ............97 Leaving an advisory message ....96 trunk keys ..........110 LED display Parking a call ..........
Page 147 Index Ringer cutoff Text ..........87 Ringing group answering ........... 120 ..........95 Room monitor receiving ..........89 ........... 95 Text message deleting/displaying ......... 94 sending ............. 94 Second layer ..........38 Three-party conference ......41 Second level ..........37 Timed reminder ..........
Page 148: Overview Of Functions And Codes
Overview of functions and codes Overview of functions and codes The following table lists all available functions, as shown on the display. If configured (con- tact your service personnel), functions can be activated interactively (select + confirm), via the Program/Service menu (select + confirm or enter a code), or with function keys..
Page 149 Overview of functions and codes ... Interac- ... Via the Program/ tively ... using Service menu Functions page 31 (=display) Code Associated dialing Recording Busy override Room monitor En-bloc dialing Dial Data I/O Service Resetting services Speaker call HF answerback on HF answerback off DISA DISA intern...
Page 150 Overview of functions and codes ... Interac- ... Via the Program/ tively ... using Service menu Functions page 31 (=display) Code Conference Start conference Add party End conference View conf parties Remove party Drop last conf. party Show call charges (own phone) View call charges (other party’s tele- phone) Use speed dialing...
Page 151 Overview of functions and codes ... Interac- ... Via the Program/ tively ... using Service menu Functions page 31 (=display) Code Callback View callbacks/delete Suppress call ID Restore caller ID Temporary MSN (not for U.S.) Ring Transfer: On Ring Transfer: Off #502 Ringing group on Ringing group off...
Page 152 Overview of functions and codes ... Interac- ... Via the Program/ tively ... using Service menu Functions page 31 (=display) Code Pickup - directed Pickup - group Accept call Forwarding on 1=all calls 2=external calls only 3=internal calls only Forwarding off CFNR on CFNR off #495...
Page 153: Display Icons
Display icons Display icons Status bar The ring tone is deactivated page 131 The "Do not disturb" function is activated page 87 The phone lock is activated page 90 Messages You received new voice messages page 29 Call forwarding is active page 43 A mobility user is logged on to the phone page 99...
Page 154 Hofmannstr. 51 80200 München Deutschland Siemens Enterprise Communications GmbH & Co. KG is a Trademark Licensee of Siemens AG Reference No: A31003-S2000-U107-7-7619 The information provided in this document contains merely general descriptions or char- acteristics of performance which in case of...

This manual is also suitable for:

Hipath 3000 Hipath 5000 Hipath openoffice Openstage 40

Siemens HiPath 2000 User Manual

Important Information

General Information

Getting to Know Your Openstage Phone

Basic Functions

Enhanced Phone Functions

Programming Sensor Keys

Displaying and Assigning Call Charges

Privacy/Security

More Functions/Services

Making Calls in the Team/Executive/Secretary

Configuration

Using Team Functions

Special Functions in the LAN

Individual Phone Configuration

Testing the Phone

Differing Display View

In a Hipath 4000 Environment

Web Interface (WBM)

Fixing Problems

Index

Overview of Functions and Codes

Display Icons

Quick Links

Related Manuals for Siemens HiPath 2000

Summary of Contents for Siemens HiPath 2000