Setting Station On/Off Options - Samsung iDCS 500 User Instruction

iDCS 500
TECHNICAL MANUAL

1.12 SETTING STATION ON/OFF OPTIONS

The iDCS 500 allows the system administrator to set any of the keyset features listed
below.
M L
VERSION VERSION
00 00
01 01
02 02
03 03
04 04
05 05
06 06
07 07
– 08
08 09
09 10
FEATURES
AUTO HOLD
AUTO TIMER
HEADSET USE
HOT KEYPAD
KEY TONE
PAGE REJOIN
RING PREF.
NOT FOR USA
AUTO CAMP-ON
AME BGM
AME PSWD
1.17
PART 1 NOVEMBER 2001
DESCRIPTION
Automatically places an existing C.O. call
on hold if a CALL button, trunk key or trunk
route key is pressed during that call.
Automatically starts the stopwatch timer
during a C.O. call.
When ON, this feature
hookswitch allowing a headset user to
answer all calls by pressing the ANS/RLS
button.
When ON, this feature allows the user to
dial directory numbers without having to
first lift the handset or press the SPK
button.
Allows the user to hear a slight tone when
pressing buttons on keyset.
Allows the user to hear the latter part of
page announcements if keyset becomes
free during a page.
When OFF, requires the user to press the
fast flashing button to answer a ringing call
after lifting the handset.
This field is reserved and can not be used
for U.S. software.
Keyset users can allow intercom calls to
camp-on to other keysets without having to
press a CAMP-ON key.
This feature selects whether a station using
Answer Machine Emulation will hear their
personal greeting or BGM while callers are
listening to the personal greeting. A BGM
source must be selected for this to work.
If this option is set to YES, station users
who have AME set must enter their station
password to listen to messages being left.
USER INSTRUCTIONS
disables the