Initializing Using The Machine's Operation Panel; Factory Default - Canon PIXMA MX860 series Getting Started

o
Make sure that Yes is selected and press the OK button.
Do you want to restore
the factory default
LAN settings?
Ves
1 Initializing using the machine's Operation Panel
No
Follow these steps to restore the machine's network settings to factory defaults.
o
Press the Menu button, use the
-4
or • button to select Settings,
then press the OK button.
$
copy
.T~n~
Settings
Perform various device
settings and maintenance.
. 0
Confirm that the right screen appears.
After a while, the LAN settings screen returns.
r-'-'--""'-- ._--_._._--_._.._',
!
Following is completed.
I
Reset LAN settings
I
• The machine's network settings are restored to factory defaults.
e
Select Device settings and press the OK button.
HI
Settings
Factory Default
BJNPSETUP
Disable
Active
Obtain an IP address automatically
IP address: 192.168.2.123 (default)
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
. Inactive
. Obtain an IP address automatically
IP address: 192.168.1.123 (default)
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
Device settings
Perform various settings.
HI Device settings
;~~n:']:I~~.~e~.:~:tting~_
...- ..
1'-
Print settings
,LAN SfItIings
Advanced settings ~
PictBridge settings
l!
Iil:t&>Set
e
Use the .... or ... button to select LAN settings, then press the
OK button.
o
Select Reset LAN settings and press the OK button.
HI
LAN settings
7