Canon PIXMA MX860 series Getting Started page 37

II
II
II
II
II
II
II
II
II
II
II
Next, read "17 Information" on page 43!
Confirm the measurement results, then click Finish.
Ensure that. is displayed in Connection Performance between the Printer and the
Access Point.
€®
~
------------------------------
• If any symbol other than. is displayed, refer to displayed comments and Help for
improving the status of communication link.
• To check whether the new location is better, click Remeasurement. Measurement of the
communication status is performed again.
• When any message on Overall network performance appears in the measurement
results, rearrange the machine and other network devices following the instructions on the
screen.
'Wtw:lntheCOl"Jl"edJonpMOIIMl'lCeIlPOOf.placeltleprrtercloulllGlhtac:ceu
ptd<!lNfrefllO¥e . .
l'llerfemg~betwe.nlhem Poorcornedlon
PS!OfIlWICel'lilcausetntatMllP8IlIbonltueh.tIowPlf'llln!l)
Il.wf ..... at:Ql.4llll~
. . . .
lo _ _ lhec:omedlon~
rvouc..c.a"~~""lhe .~PfOIPU.'
On the Connection Performance Measurement dialog box, click Next.
Measuring of the communication status starts, and the results are displayed.
• Measuring takes a few minutes. You can cancel measuring by clicking Cancel. You also
examine the detailed status of the communication link after setup by using the Canon IJ
Network Tool. For details, refer to the on-screen manual: Advanced Guide.
w _