Canon PIXMA MX860 series Getting Started page 59

The printer in the netwOrk could not
~ d~tectf'd
.IutomUkalfy.
Set the IP add,us ohke: printer to
bt.
used.
TCP/IP
Setting
fc;t'iP
addtu; lIUtomatiaii
v -'
_~"H
. _ . - - ' , : ;
If the following screen appears
Oof:s tltt ponter haw;
~
wired LAN port that
i~
(onneC1rd to
the
tAN?
B
o
Remove the LAN connector cap (A) of the machine, connect a network device with a LAN
cable (B), then click Yes.
When the Set Printer IP Address screen appears,
click Connect.
If
the machine is detected automatically, the Set Printer
IP Address screen does not appear.
w _ II
• If no connection is established even after Connect is
clicked, refer to "5.6 The Set Printer IP Address screen is
displayed during setup" in the printed manual: Network
Setup Troubleshooting.