Troubleshooting - Canon PIXMA MX860 series Getting Started

If the following screen appears
If the following screen appears
The roJkl'<NtRg access ~nu were delected
StIKt che
~CceS5
point to connKt to, W did (Connectl.
II
II
II
II
II
II
II
II
II
II
II
The
printer In the network could not
~
detuted
.utotn~lcalty.
Set lhe IP addreu of the printer to be. used.
TCPIIPSetting
When the
Set Printer IP Address
screen appears, click
Connect.
If the machine is detected automatically, the Set Printer IP Address screen
does not appear.
• If no connection is established even after Connect is clicked, refer to "5.6 The
Set Printer IP Address screen is displayed during setup" in the printed manual:
Network Setup Troubleshooting.
w _
When the
Access Points
screen appears, select an access point to
use, then click
Connect.
(~:~-:o~:'~~;~'-~-~--
0
II
you "fled to configure the pttnttr MtworX settings manually to (onn&<t to
the access point, dkk tM~nl.laJ
Setup).
® (
Manual Setup)
When an access point is detected automatically, the Access Points screen
does not appear.
• If you want to select an access point manually, or if the target access point
is not displayed in the list, or if an error message appears, refer to "5 The
following screen is displayed during setup" in the printed manual: Network
Setup Troubleshooting.
• To connect to the access point with WEP, WPA or WPA2 displayed in the
Encryption column, enter the network password, then click Connect. For
details on network passwords, refer to "3.1 About Network Key (Windows)/
Network Password (Macintosh)" in the printed manual: Network Setup
Troubleshooting.
~---------------
w _