Panasonic KX-TD816 Installation Manual page 492

Optional Programming
990
-System Additional Information (contd)
xea Field
Description Selection
Default References
02 (19)
Determines the initial display of a digital 0
:
names 0
Special Display
display proprietary telephone (KX-T743 11
1 :
numbers
Features - Call
M-T7433/KX-T7436/KX-T7235) in
Directory
Station Speed Dialing.
(20)
Determines the source of Music Source 1 0
:
internal music 1
l
Background
for Music on Hold and BGM. source Music (BGM)
1 :
external music
l
Background
source Music (BGM)
- External
l
Music on Hold
(21) Selects inter-digit pause for pulse dialing. 00
:
630 ms
01 None
01:
830 ms
10 :
1030 ms
(22) Selects intercom dial tone frequency. 0
:
normal 0 None
1 :
distinctive
(26) Selects the extension-hooking signal
0
:
84-1000 ms
1
None
detection time.
1:
200-1000 ms
03 (23) This field is provided to assign PAD 0:OdB 0 None
and Switch Control (volume control of
1:
-3 dB
04 received calls on an outside line). This can
be
assigned per outside line. The outside
line numbers
[1]
through [8] correspond to
outside lines 1 through 8 for KX-TD816,
and outside line numbers
[l]
through [24]
correspond to outside lines 1 through 24
for KX-TD 1232 respectively.
04 (24) Prevents or allows a calI originated by an 0
:
prevent 1 Voice Mail
Automated Attendant (AA) port of Voice
1:allow
Integration
Processing System (VPS) to another AA
port-
(25) Prevents or allows sending pulse dialing 0
:
prevent 1 None
signals during an outside call.
1: allow
(27) Enables or disables the outside line pulse
0
:
disable 1 None
feedback tone.
1 :
enable
05 (30) Enables or disables the automatic time 0
:
enable 1 CalIer ID
adjustment by Caller ID information once a
1:
disable
day by the first call received after 3:OOAM.
(3 1) Have an option to restrict the DISA 0: lOtimes
1 Direct Inward
outside-to-outside line extending time. 10
1:
no limitation System Access
attempts are allowed.
@ISA)
(32) Enables or disables retry by dialing " * "
0
:
disable 1 DISA
during DISA outside-to-outside line calling.
1:
enable