Line Preference - Outgoing (Idle Line / No Line / Prime Line) - Panasonic KX-TD816 Installation Manual

Features
L
Conditions
l
Setting a new line preference feature cancels the previou< setting
l
If Prime Line Preference i4 elected and an incomin,u call arrives from
a line other than the prime line. it cannot be answered just by going off-
hook. The Prime Line should be assiged to the Sinple CO button.
l
If Ringing Line Preference is selected. going off-hook does not answer
a line programmed for "no ring" even though there is an incoming call.
Going off-hook during the delay time does not answer a line
programmed for "delayed ringing."
. A single
line telephone is always set to Ringing Line Preference and
cannot be changed.
Programming References
Station Programming... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Manual.
Preferred Line Assignment - Incoming
Feature References
None
Operation References
Basic Operation,
-User Manual
Receiving Calls
Line Preference - Outgoing (Idle Line / No Line / Prime Line)
Description
A
proprietary telephone user can select a desired outgoing line
preference to originate calls from the following three line
preferences:
(1)
(2)
(3)
Idle Line Preference:
When you go off-hook, you are connected to an idle line.
An idle line is automatically selected from the pre-assigned
lines.
No Line Preference:
No line is selected when you go off-hook. You must select
a line to make a call.
Prime Line Preference:
When you go off-hook, you are connected to the pre-
assigned line. Assign a line as your prime line beforehand.
Conditions
. Setting a new line preference feature cancels the previous setting.
l
To set Prime Line Preference, one prime line is selected from intercom
or CO lines.
l
The CO lines
used by users must be connected by programming.
l
To select Idle Line Preference, CO lines available for the user should
be programmed. Also CO lines available for Automatic Line Access
should be assigned.
Features 3-81