Panasonic KX-TD816 Installation Manual page 264

42 0
Manager Programming
007
\
DSS Console Port and Paired Telephone Assignment
(contd.)
9.
Repeat steps 4 through 8.
10.
Press END.
Conditions
.
The extra Device Port feature must be assigned "Disable" for DSS
ports.
There is a maximum of four DSS Consoles per system. System
Connection permits eight DSS Consoles for KX-TD1232
.
Each DSS
Console must be assigned to a DSS Console jack and paired with a
proprietary telephone jack in the same system.
For XX-TD8 16, DSS Consoles 1 through 4 must be assigned to a jack
number between 02 and 16.
For KX-TD1232, DSS Consoles 1 through 4 must be assigned to a jack
number between 02 and 32 and DSS Consoles 5 through 8 must be
assigned to a jack number between 33 and 64, if available.
DSS Consoles in the out-of-service system are unassignable. Jack
numbers in the out-of-service system are unacceptable.
The jack number for the Console and that for the paired extension must
be entered together.
Multiple DSS Consoles cannot be assigned to the same DSS Console
jack.
Multiple DSS Consoles can be paired with the same proprietary
telephone jack.
A DSS Console jack cannot be assigned the jack 01 and the jack
number of Manager set in program [006] "Operator / Manager
Extension Assignment."
If all incoming CO calls are set to ring at the operator extension
telephone in program [407]-[408] "DIL 1: 1 Extension - Day /
Night," assigning the DSS Consoles to the operator extension makes the
operator's job much easier.
Feature References
Section 3, Features,
DSS Console (XX-T7240 / KX-T7040)
System Programming
4-27