Panasonic KX-TD816 Installation Manual page 383

61
l
Troubleshooting
6.1.2 Connection
Connection between the RX-TD816KX-TD1232 and a proprietary telephone:
T
CAUSE SOLUTION
Can you dial
1 an extension?
1
No
I
The T/R is connected to the D l/D2.
Use the correct cord (inner 2
wires are for T/R and the
outer 2 wires are for Dl/D2).
I
Yes
M--I'D816
KX-l-D1232
extension
*The PI/P2 is connected to the Dl/D2.
Use the correct cord (2 wires
second from the outside for
Dl/D2 and the outer 2 wires
are for Pl/P2).
.
I I
RX--l-D1232 extension
Connection between the RX-TD8 16/Kx-TD 1232 and a single line telephone:
CAUSE
SOLUTION
I
The T/R is connected to the Dl/D2. Use the correct cord (inner 2
wires are for T/R).
Kx-l-D816
KX-TD 1232
extension
l
If a telephone equipped
with an A-Al relay is
connected to the KX-
TD816/KX-TD1232, set
the A-Al relay switch of
the telephone to "OFF."
Connection between the KX-TD8 16/KX-TD 1232 and a single line
telephone that is polarity-sensitive:
SOLUTION
Reverse the connections of
the T/R..
CAUSE
The "T" is connected to the "R."
Kx-TD816
KX-TD 1232
extension
'I
(Continued on the
following page.)
*: Available for KX-TD1232 only.
Troubleshooting 6-3