Extra Device Port (Xdp); F Flash - Panasonic KX-TD816 Installation Manual

Features
EF
Extra
Device Port (XDP)
Description
Extra
Device Port (XDP) expands the number of telephones
available in the system by allowing an extension jack to contain
two telephones. A digital proprietary telephone (DPT) and a single
line telephone (SLT) can be connected to the same jack but have
different extension numbers so that they can act 3s completely
different extensions.
Conditions
.
XDP requires previous programming of the individual jack. Enable
XDP
mode for the desired jack by System Programming. Immediately
after changing the assignment. changed setting may not work for a
maximum of eight seconds.
If an analog proprietary telephone (APT) and SLT are connected to an
XDP-enabled jack. neither telephones work.
If XDP is disabled for the jack, DPT and SLT may be used as
Paralleled Telephones. APT and SLT also can be
used
as Paralleled
Telephones.
Connection References
Section 2, Installation,
2.3.6
Extra
Device Port (XDP) Connection
Programming References
Section 4, System Programming,
[600] Extra Device Port
Feature References
Section 3, Features,
Paralleled Telephone
Operation References
Not applicable.
Flash
Description
The FLASH button is used to allow 3 proprietary telephone user to
disconnect from the current call and originate another call without
hanging up first.
Conditions
l
If External Feature Access is enabled by System Programming, this
function does not work for a CO call.
l
Pressing the FLASH button re-starts the conversation duration, outputs
an SMDR record, inserts the automatic pause, and checks toll
restriction level again.
Features
3-65