Panasonic KX-NCP500 Programming Manual page 955

•
6.10 [4-2-1] Portable Station—Extension Settings—Main
–
Extension Number
–
Extension Name
Feature Manual References
13.1.21 Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
Private Network Features—QSIG—CT (Call Transfer)
•
3.33 [1-1] Slot—Port Property - PRI Port—Supplementary Service—
CNIR, CONR, CF (Rerouting), CT, CCBS, E911
•
3.38 [1-1] Slot—Card Property - IP Gateway (KX-TDE series only)—
Feature Manual References
13.1.24 Private Network Features—QSIG—CT (Call Transfer)
Private Network Features—QSIG—Enhanced Features
•
4.18 [2-9] System Options—Option 2—
•
11.1 [9-1] TIE Table—Enhanced QSIG
Feature Manual References
13.1.25 Private Network Features—QSIG—Enhanced Features
Private Network Features—VoIP (Voice over Internet Protocol) Network
•
3.42 [1-1] Slot—Card Property - IP Extension—Common Settings (KX-TDE series only)—
Address
Feature Manual References
13.1.26 Private Network Features—VoIP (Voice over Internet Protocol)
PS (Portable Station)
•
3.47 [1-2] Portable Station
Feature Manual References
13.1.27 PS (Portable Station)
PS—CO Status Display (KX-WT125/KX-WT126 only)
•
3.48 [1-3] Option—
System Restart)
•
6.17 [4-2-6] Portable Station—Single CO Appearance
Document Version 2011-10
CO - CO Call Limitation—After Conference
System Wireless—CO Status Display in Standby (KX-WT125/126 only) (Need
14.2 Feature Programming References
COLP, CLIR, COLR, CNIP, CONP,
QSIG-CT
PC Programming Manual
Gateway
955