11-3] Power Failure Transfer - Panasonic KX-NCP500 Programming Manual

13.3 [11-3] Power Failure Transfer

13.3 [11-3] Power Failure Transfer
When the power supply to the PBX fails, power failure transfer (PFT) switches the current connections to
Auxiliary Connections, so that certain SLTs and CO lines can be connected. Auxiliary Connections allow CO
line calls to be made during a power failure. For KX-NCP series PBXs, one CO line card and one extension
card that are physically connected by RJ45 cable can be specified. For KX-TDE series PBXs, up to 6 pairs of
CO line cards and extension cards that are physically connected by RJ11 cable can be specified. The
conversations through the lines specified here will be maintained even when the power returns.
For the KX-TDE600, select the shelf for which to set connections from the Shelf list. Note that PFT connections
can only be made within the same shelf.
Trunk Card Slot No.
Specifies the position of the CO line card to be used.
Default
None
Value Range
For KX-NCP500:
None, Small Free Slot 1, Small Free Slot 2, Small Free Slot 3
For KX-NCP1000:
None, Small Free Slot 1, Small Free Slot 2, Small Free Slot 3, Small Free Slot 4
For KX-TDE series:
None, 1–11
Maintenance Console Location
13.3 [11-3] Power Failure Transfer
Programming Manual References
None
Feature Manual References
13.1.11 Power Failure Transfer
Extension Card Slot No.
Specifies the position of the extension card to be used.
Default
None
Value Range
For KX-NCP500:
None, Small Free Slot 1, Small Free Slot 2, Small Free Slot 3
890 PC Programming Manual Document Version 2011-10