Panasonic KX-NCP500 Programming Manual page 147

T302
Specifies the maximum time allowed between each digit on an incoming call. Applies to overlap receiving.
Default
150 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
T303
Specifies the maximum time that the PBX waits for a reply after sending the SETUP (call setting) message.
Default
60 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
T304
Specifies the maximum time allowed between each digit on an outgoing call. Applies to overlap sending.
Default
300 ´ 100 ms
Document Version 2011-10
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
PC Programming Manual 147