Panasonic KX-NCP500 Programming Manual page 88

3.2 [1-1] Slot—Summary
3.32 [1-1] Slot—Card Property - PRI type
3.35 [1-1] Slot—Card Property - T1 type
3.38 [1-1] Slot—Card Property - IP Gateway (KX-TDE series only)
3.41 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
3.44 [1-1] Slot—OPB3 Card Property
Feature Manual References
None
Status
Indicates the card status (reference only).
Note that MPR card status is always displayed as "-".
Default
Slot 00: - (fixed)
Other slots: Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Pre-Install: A card has been added to the slot.
Idle: No card is installed in the slot.
Maintenance Console Location
3.2 [1-1] Slot—Summary
Programming Manual References
3.1 [1-1] Slot
Feature Manual References
None
Version
Indicates the LPR version of the installed card (reference only).
For IP-EXT cards, both the LPR version and the VoIP version are displayed. The LPR version is shown on the
left, and the VoIP version on the right, as follows:
(Example) 1.002 / 1.001
Default
Current version number
Value Range
Version number
88 PC Programming Manual Document Version 2011-10