Factory Defaults; Firmware Upgrade - Cisco SPA112 Administration Manual

Administration Settings

Factory Defaults

Factory Defaults

Firmware Upgrade

STEP 1
STEP 2
!
CAUTION
Cisco SPA100Series Administration Guide
Use the Administration > Factory Defaults page to reset the ATA to the default
configuration. Alternatively, press and hold the RESET button for 20 seconds. All
user-changeable non-default settings will be lost. This may include network and
service provider data.
You can perform the following tasks:
• Restore Router Factory Defaults: Choose Yes to remove any custom data
(router) settings that you have configured. The default settings will be
restored when you click Submit.
• Restore Voice Factory Defaults: Choose Yes. to remove any custom
settings that you configured on the Voice pages of the configuration utility.
The default settings will be restored when you click Submit.
Use the Administration > Firmware Upgrade page to upgrade the firmware on the
ATA. It is not necessary to upgrade unless you are experiencing problems with the
ATA or if the new firmware has a feature that you want to use. Before upgrading the
firmware, download the firmware upgrade file for the ATA at:
smallbizvoicegateways
Click Browse and select the location of the upgrade file that you downloaded.
Click the Upgrade button to upgrade the firmware.
Upgrading the firmware may take several minutes. Until the process is complete,
DO NOT turn off the power, press the hardware reset button, or click the Back
button in your current browser.
5
www.cisco.com/go/
120