Samsung OfficeServ 500 General Description Manual page 15

LOCAL CONTROL PROCESSOR (LCP2)
The Local Control Processor (LCP2) card is installed in a dedicated processor slot, slot 10, of each Expansion KSU
and does not reduce the available universal card slots of that cabinet. The LCP2 card has positions for three
daughter boards. The first daughter board position (LCP2-D1) can support one of two types of daughter board, a
Multi-Frequency Module (MFM), or an R2/CID Module (RCM). The second daughter board position (LCP2-D2) can
support the MFM, the RCM or the MISC. The third daughter board position (LCP2-D3) can support one of two
types of daughter board, a Multi-Frequency Module (MFM), or an R2/CID Module (RCM).
LOCAL CONTROL PROCESSOR (LCP2) DAUGHTER BOARD CAPABILITIES
Position
LCP2 -D1
LCP2 -D2
LCP2 -D3
Note: Only one of any type of daughter board may be installed on any processor card.
Types of Daughter Boards allowed per position
MFM, RCM
MFM, RCM and MISC
MFM, RCM
2.3