System Tones - Samsung OfficeServ 500 General Description Manual

3.5 SYSTEM TONES

TONE
DIAL TONE
RINGBACK TONE
DID RINGBACK TONE
BUSY TONE
DND / NO MORE CALLS
TRANSFER / CONF
CONFIRMATION TONE
ERROR TONE
SYSTEM TONES
Intercom Dial Tone—A steady tone that indicates you can begin dialing.
DIAL TONE
Ringback Tone—Indicates the station you dialed is ringing.
RINGBACK TONE—1000 ms ON/3000 ms OFF
Busy Signal—Indicates the station you dialed is busy.
BUSY TONE—500 ms ON/500 ms OFF
DND/No More Calls Tone—Fast busy tone advises you the station you dialed is in the Do Not Disturb mode or
cannot receive any more calls.
DND/NO MORE CALLS TONE—250 ms ON/250 ms OFF
FREQUENCIES
350 + 440 Hz Continuous
440 + 480 Hz 1 sec on + 3 sec off
440 + 480 Hz 2 sec on + 4 sec off
480 + 620 Hz 0.5 sec on + 0.5 sec off
480 + 620 Hz 0.25 sec on + 0.25 sec off
350 + 440 Hz 0.1 sec on + 0.1 sec off
350 + 440 Hz 0.05 sec on + 0.05 sec off
480 + 620 Hz 0.05 sec of tone 1/0.05 sec of tone 2
3.3
CADENCE
CONTINUOUS
CONTINUOUS
CONTINUOUS
FOR TEN SECONDS