Samsung OfficeServ 500 General Description Manual page 14

MAIN CONTROL PROCESSOR (MCP2) DAUGHTER BOARD CAPABILITIES
Position
MCP2 - D1
MCP2 - D2
MCP2 - D3
* The ESM must be installed in this position in a Multiple Cabinet .
Note: Only one of any type of daughter board may be installed on any processor card. In an L version system ONLY
the ESM board can be installed on the MCP2 card. Do not install any other types of daughterboard on the MCP2
in an L version system. Other daughterboards may be installed on the SCP2 card.
SWITCH CONTROL PROCESSOR (SCP2)
The Switch Control Processor (SCP2) is installed in slot 9 of the KSU and reduces the available universal card slots
to eight. The SCP2 card is required when the system is to be expanded beyond a single cabinet or L version soft-
ware is required. The SCP2 card has positions for three optional daughter boards. The first daughter board posi-
tion (SCP2-D1) can support one of three types of daughter board, a Multi-Frequency Module (MFM), a
Switch/Conference Module (SCM) or an R2/CID Module (RCM2). The second daughter board position (SCP2-D2)
can support the MFM, the SCM, the RCM2 or the MISC. The third daughter board position (SCP2-D3) can support
one of the three types of daughter board, a Multi-Frequency Module (MFM), a Switch/Conference Module (SCM)
or an R2/CID Module (RCM2).
Note: Only one of any type of daughter board may be installed on any processor card.
SWITCH CONTROL PROCESSOR (SCP2) DAUGHTER
Position
SCP2 - D1
SCP2 - D2
SCP2 - D3
Types of Daughter Boards allowed per position
MFM, SCM, RCM2 and ESM*
MFM, SCM and RCM2
MFM, SCM, RCM and MISC
Types of Daughter Boards allowed per position
MFM, SCM, RCM2
MFM, SCM, RCM2, and MISC
MFM, SCM, RCM2
2.2