Printer Driver Settings - JVC CX-7000 Series Electronic Manual

Printer Driver Settings

"[Setup] Tab" (A page 87)
"[Print] Tab" (A page 87)
"[Printing area] Dialog Box" (A page 89)
"[Color] Dialog Box" (A page 90)
"[Look up table] Dialog Box" (A page 90)
"[Dither] Dialog Box" (A page 91)
"[UV ink] Dialog Box" (A page 91)
"[Printer settings] Dialog Box" (A page 94)
"[Encode] Tab" (A page 94)
"[Configuration] Tab" (A page 95)
"[Version] Tab" (A page 95)
Setting Example
"Example of Printer Setting" (A page 96)
"Example of Encode Setting" (A page 102)
[Setup] Tab
.
Orientation
Settings for printing orientation.
Portrait
Print with the shorter edge of the card on top.
Landscape
Print with the longer edge of the card on top.
Number of copies
Number of copies to print. Enter a number up to 999.
Settings for turns over the card
Settings for the card turn over operation.
Turns over the card after loading
Selecting this checkbox turns over the card after it is loaded.
[Load...] button
Loads setting information from a specified file.
[Save...] button
Saves setting information to a specified file.
[Print] Tab
.
Print
Executes printing.
Checked : Executes printing.
Unchecked : Printing is not executed, but encoding can be
performed.
Print on both sides
Prints both sides of the card.
Unchecked : Prints one side of the card.
Checked : Prints both sides of the card.
Print the back side first
Prints the image on the back side first when printing on both sides of
the card.
Unchecked : Starts printing from the image on the front side.
Checked : Starts printing from the image on the back side.
Memo:
The checkbox is enabled during double-sided printing.
Front side/Back side
Front side : Print settings for the front side of the card.
Back side : Print settings for the back side of the card.
Print mode
Ink list. Specify the ink to use for printing.
1. YMC:
Prints using the YMC ink.
2. K:
Prints using the Resin K ink.
3. YMCK:
Prints using the YMC ink and Resin K ink.
4. YMC+UV:
Prints using the YMC ink. Prints data set in the [UV ink] dialog
using the UV ink.
5. K+UV:
Prints using the Resin K ink. Prints data set in the [UV ink]
dialog using the UV ink.
6. YMCK+UV:
Prints using the YMC ink and Resin K ink. Prints data set in the
[UV ink] dialog using the UV ink.
Cautions:
Print error occurs if an ink that is not mounted to the printer is
selected.
Setup
87