Cards - JVC CX-7000 Series Electronic Manual

Troubleshooting

Cards

Cards have Run Out
"Replenish the cards." (A page 31)
Card Jam
Error codes are displayed on the operation panel according to the
location of the card jam.
Check the error code, and remove the card according to the
corresponding procedure.
Cautions:
If the card cannot be removed, do not try to do so forcibly. Consult
our authorized dealers or the servicing personnel.
If the security lock is on, deactivate it. After work is complete,
activate the security lock again.
Do not apply excessive force on the card hopper. Doing so may
damage it.
Do not touch the printing surface of the card. Touching it may cause
printing errors. Put on the supplied gloves when handling the cards.
Error Code Jam(Hopper) 90
Card jam near the card hopper and cleaning roller.
.
1
Detach the card hopper cover, and remove the unused cards
.
2
Remove the jammed card with a hand
.
"If the card cannot be removed by hand" (A page 46)
3
Return the unused cards to their original position
4
Install the card hopper cover
46
If the card cannot be removed by hand
A Press KNB to reset the printer
.
The card is discharged from the NG card outlet.
.
"Go to step 3" (A page 46)
"If the card cannot be discharged" (A page 47)