JVC 0503-AH-ID-JVE Instructions Manual page 77

Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector
if you have a decoder, L-1 IN/OUT connector to TV's
connector, and L-2 IN/DECODER connector to the
satellite receiver's connector. Then connect the satellite
receiver and TV.
Satellite receiver
Decoder
Back of recorder
Mains outlet
Outdoor unit
Satellite cable
NOTES:
Set "L-2 SELECT" to "A/V" (
You can use Automatic Satellite Programme Recording
function ( pg. 51) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key "0") and/or VCR PR so
that "L-2" appears on the front display panel.
To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
For details, refer to the instruction manual of the satellite
receiver and decoder.
Aerial
21-pin SCART connector
TV aerial cable
ANTENNA IN
ANTENNA OUT
SAT CONTROL
CONTROLEUR SAT
pg. 69).
Back of TV
S VIDEO
OUT
SORTIE
77
EN
Aerial
connector