JVC 0503-AH-ID-JVE Instructions Manual page 29

A
Turn on the recorder.
Press 1.
B
Select the HDD deck.
Press HDD.
C
Choose a programme.
Press VCR PR +/– or the number keys to select the
channel you wish to record.
The temporary recording begins.
D
Locate the point to start playback from.
Press or to search for the previous part of the
w 3
currently viewing programme (temporary recorded on the
background).
E
Start Live Memory Playback.
Press .
4
F
Stop Live Memory Playback.
Press .
8
The on-air screen resumes.
NOTES:
You can use various playback features during Live Memory
Playback. ( pg. 30)
If you have started actual recording by pressing
in step F only resumes the on-air screen. To stop actual
recording, press again.
8
About limitation on Live Memory Playback
The temporary recording for Live Memory is cancelled in the
following cases, and will start all over again when it is to
resume.
When the power is turned off
When the system is powered again after a power failure
was occurred
When normal recording (
recording ( pg. 46, 48), live memory recording
( pg. 29), or automatic satellite programme recording
( pg. 51) is performed
When the thumbnails are changed (
When the "LIVE MEMORY" setting is changed (
When tuner channel setting is performed (
, pressing
7
pg. 22), timer programme
pg. 56)
pg. 81)
pg. 14, 88)
Live Memory Recording
Perform steps A to D of "Live Memory Playback" (
before continuing.
A
Start Live Memory Recording.
On the recorder
Press .
7
On the remote control
Press and hold
7
HDD REC indicator and the record indicator on the front
display panel blinks, then after a few seconds, the current
broadcast screen resumes.
B
Stop Live Memory Recording.
Press .
8
NOTES:
You cannot use Live Memory Recording for channels other
than the channel you are currently watching.
Recording speed is automatically set to SP mode when Live
8
Memory Recording is started.
Temporarily recorded data prior to the beginning of Live
Memory Recording is erased when Live Memory Recording
started.
, then press .
4
29
EN
pg. 29)