Play List - JVC 0503-AH-ID-JVE Instructions Manual

Scan for Beginning of Programme (or

Play List)

You can scan the beginning of the programme (or play list) easily
with the HDD Navigation. For details of the play list, refer to
"Play List Features" (
pg. 60).
Turn on the TV and select the AV mode.
Slide TV/CABLE/SAT switch to the right.
If the recorder is turned on with HDD deck selected,
there may be about 30 seconds' delay in starting to
show pictures on the screen.
A
Turn on the recorder.
Press 1.
B
Select the HDD deck.
Press HDD.
C
Access the Index screen.
On the recorder
Press NAVIGATION.
On the remote control
A Press NAVIGATION. The HDD Navigation screen
appears.
B Press
to move the arrow to "REC LIST", then press
w e
OK.
When you wish to play back a play list, select "PLAY LIST",
then press OK.
?
D
Select the programme.
On the recorder
Turn the JOG dial to select
the programme (or play list),
then press the JOG dial.
On the remote control
Press to move the
w r e t
arrow on the index (small
still pictures) of the desired
programme, then press OK.
When you wish to play back a programme during recording
from the beginning, press
top left corner index of the recording programme.
E
Start playback.
Press to move the arrow to "BEGINNING", then
w e
press OK again.
To repeat playback of a selected programme (or play list), refer
to "Repeat Playback" (
F
Pause playback.
Press 9.
To resume normal playback, press 4.
G
Stop playback.
Press 8.
To resume playback from the point where playback was
previously stopped, press
"RESUME", then press OK.
EN
to move the arrow to the
w r e t
pg. 32).
to move the arrow to
w e
25