System Connections; Connecting To A Satellite Receiver - JVC DR-MV1B Instructions Manual

Filename [DR-MV1SEK_09Editing.fm]
DR-MV1SEK_00.book Page 78 Thursday, April 15, 2004 3:30 PM

SYSTEM CONNECTIONS

78
EN

Connecting To A Satellite Receiver

Simple Connections
Connect the satellite receiver to the L-2 IN/DECODER connector,
then connect the L-1 IN/OUT connector to the TV's connector.
NOTES:
Set "L-2 SELECT" to "VIDEO" or "S-VIDEO". (
You can use the Automatic Satellite Programme Recording function
( pg. 50) with this connection. (DVD deck only)
To record a programme via the satellite receiver, select L-2 mode by
pressing PR +/– so that "L-2" appears on the front display panel.
For details, refer to the instruction manual of the satellite receiver.
Outdoor unit
Satellite cable
Satellite receiver
TV
IMPORTANT
When you set "L-2 SELECT" to "SAT VIDEO" or "SAT S-VIDEO"
( pg. 74), it is possible to view a satellite broadcast with the TV
set to its AV mode even if the unit is turned off. When the unit is
in Stop mode or recording, press TV/VCR on the remote control
to turn off the VCR indicator on the unit.
If you turn on the unit when the satellite receiver's power is off,
nothing appears on the TV screen. In this case, turn on the satellite
receiver, or set the TV to its TV mode, or press TV/VCR on the
remote control to set the unit to the AV mode.
Page 78
pg. 74)
Aerial
TV aerial cable
ANTENNA IN
ANTENNA OUT
Masterpage:Left0
April 15, 2004 3:18 pm