Adjusting The Picture Quality - JVC DR-MV1B Instructions Manual

Filename [DR-MV1SEK_05DVD Operation1.fm]
DR-MV1SEK_00.book Page 38 Thursday, April 15, 2004 3:30 PM
OPERATIONS ON DVD DECK
38
EN
a
1
4
7
CANCEL (&)
ENTER
2
CLEAR (8)
Simulated Surround Effect
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your
2-channel stereo system.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select " ", then press ENTER.
Above the selected item, "3D-ON" appears and Simulated Surround
Effect is activated.
Each time you press ENTER, "3D-ON" appears and disappears
alternately.
To clear the on-screen bar
Press ON SCREEN.
To cancel the simulated surround effect
Press ENTER to clear "3D-ON" from the screen.
NOTES:
The simulated surround effect works correctly only when playing back
a title recorded in multichannels.
Simulated Surround Effect does not affect the DVD VIDEO bitstream
signal from the DIGITAL AUDIO OUTPUT connector.
When Simulated Surround Effect is activated, the settings of
"ANALOG AUDIO OUT" and "D. RANGE CONTROL" are disabled.
( pg. 80)
Page 38
SAT
2 3
0 – 9
5 6
8 9
0
ON SCREEN
rtw e
6
4

Adjusting The Picture Quality

You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select " ", then press ENTER. The pop-up
window appears under the selected item.
3
Press rt to select the desired option, then press ENTER.
NORMAL
: Normally select this option.
CINEMA
: Suitable for a movie disc, etc.
SHARP
: Clearer, sharper-edged picture when viewing images with
lots of flat, same-coloured surfaces such as cartoons.
SOFT
: Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.
Masterpage:Left+
April 15, 2004 11:41 am