Video Plus+ Timer Programming - JVC DR-MV1B Instructions Manual

Filename [DR-MV1SEK_06DVD Operation2.fm]
DR-MV1SEK_00.book Page 45 Thursday, April 15, 2004 3:30 PM
VIDEO Plus+ Timer Programming
®
You can programme this unit to timer-record as many as
8 programmes.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
DVD TIMER (#)
VCR/DVD
1
4
7
CANCEL (X)
VIDEO Plus+
ENTER
CLEAR (8)
1
Load a recordable disc.
2
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3
Press VIDEO Plus+ to access the VIDEO Plus+ screen.
4
Press the number keys to
enter the PlusCode number of a
programme you wish to record,
then press ENTER.
If you have made a mistake, press
CANCEL (&) and input the correct
number before you press ENTER.
To clear all entered numbers at a
time, press CLEAR(8).
If the number you entered is invalid, "PlusCode NO. ERROR
CONFIRM PlusCode NO. THEN RETRY" appears on the TV screen.
Input a valid PlusCode number.
If "GUIDE PROGRAMME IS NOT SET SELECT CHANNEL YOU
WANT TO RECORD" appears on the TV screen, set Guide Program
numbers manually. ( pg. 83)
When "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME" appears on the TV screen, you need to cancel some
of the reserved programmes. (
5
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
To cancel this setting, press VIDEO Plus+ or RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "VIDEO Plus+
set the Guide Program number correctly.
Page 45
SAT
2 3
0 – 9
5 6
8 9
0
RETURN
pg. 49)
® System Setup" ( pg. 83) and
OPERATIONS ON DVD DECK
6
Press w e to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
"STOP" (To advance/go back the stop time by 30 minutes, press and
hold rt).
"DAILY/WEEKLY" ( pg. 45, "Daily/Weekly Recording")
"REC MODE" ( pg. 42, "Recording Mode")
"NAME" ( pg. 61, "Modify Programme Name")
"VPS/PDC" ( pg. 57, "PDC Recording")*
* VPS (Video Programme System) recording is not currently available
in the U.K. and not possible with this unit.
7
Press ENTER to access the Programme Confirmation screen.
8
Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 – 8.
If "PROGRAM OVERLAPPED" appears on the TV screen, see
page 49.
9
Press DVD TIMER (#) to engage the unit's timer mode. The
DVD timer lamp lights up on the unit and the VCR deck is
automatically selected. Press 1 to turn off the unit. When the
VCR deck is in timer standby mode, the unit is automatically turned
off.
To disengage the timer mode, press DVD TIMER (#) again.
NOTES:
There may be cases that VIDEO Plus+ Timer Programming function
prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc
with VIDEO Plus+ Timer Programming function, the beginning of the
second one may be left off the recording.
VIDEO Plus+ Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
programme number has been changed, the wrong programme
number will be displayed on the VIDEO Plus+ programme screen in
step 5. When this happens, set the correct Guide Program number
for that station. ( pg. 83, "VIDEO Plus+
Satellite Receiver Users
To timer-record a satellite broadcast using the VIDEO Plus+
system:
A Perform "Satellite Receiver Control Setting (DVD Deck Only)"
( pg. 23).
B Perform "VIDEO Plus+
® Timer Programming" (
C Leave the satellite receiver's power on.
Daily/Weekly Recording
You can record programmes with one of the following weekly/daily
timer settings.
WEEKLY
: Select to record a weekly programme.
MON–FRI
: Select to record a daily programme from Monday
through Friday.
MON–SAT
: Select to record a daily programme from Monday
through Saturday.
SUN–SAT
: Select to record a daily programme from Sunday
through Saturday.
Masterpage:Right+
45
EN
® System Setup")
pg. 45).
April 15, 2004 3:30 pm