What You Need To Operate The Bus Interface Module - GE 90*-30 PLC Series User Manual

What You Need to Operate the Bus Interface Module

GFK-1322A
To configure and operate the LBIM, you need:
•
A personal computer or laptop computer that runs Microsoft
•
Series 90-30 backplane with CPU module
See Table 1-7 for models that can be used with the LBIM.
•
Logicmaster 90 software
Required to configure and program the Series 90-30 PLC. See Table 1-7 for versions that can
be used with the LBIM.
•
L W network binding tool
ON ORKS
Many third-party network management software packages that include network binding tools
are available. (See Table 1-8 for suggestions.)
•
IOPEN network interface configuration software: (for Microsoft Windows) This software is
provided on the utility disk supplied with the LBIM.
•
A L T adapter and a device driver (See Table 1-9 for the adapter types that can be used
ON ALK
by each model of LBIM.)
This is required to run the network interface configuration software.
®
Windows is a registered trademark of Microsoft Corporation.
Chapter 1 Overview
® ®
Windows software.
1
1-9