Bus Interface Module Overview - GE 90*-30 PLC Series User Manual

Bus Interface Module Overview

GFK-1322A
The LBIM is a standard, rack-mounted Series 90-30 PLC module. (The table on page 1-10 lists
compatible CPUs.) The module plugs easily into the PLC's backplane or into a remote PLC
baseplate. The latch on the bottom of the module secures it in position.
There are no DIP switches or jumpers to set on the LBIM. It is configured using the IOPEN.EXE
configuration software, provided with the module on floppy disk. Procedures for configuration are
provided in Chapter 4.
Figure 1-3. Series 90 PLC L
Chapter 1 Overview
LONWORKS
Bus
Interface
Module
SERVICE
N
E
T
W
O
R
K
COM
PORT
RS-422
W Bus Interface Module
ON ORKS
a45599
PWR
OUT
MSG
IN
MSG
SVC
1
1-5