Tie Cables Down; Perform Functional Checkout - GE Series 2000 Installation Instructions Manual

Cables
Functional Checkout
Procedure
AC Power Check
Ground Continuity Test
Check Power Up - Turn on Treadmill
Is the outlet tight in the wall?
Does the plug feel tight when inserted
into the outlet?
Check Treadmill Level
Is the unit level and stable.
Is the floor under the unit smooth and
with no loose tiles?
10
3. If either adjustment in step 2 results in an over-adjustment of the belt
tracking, loosen the pulley screw that was tightened and wait several
minutes for the treadmill belt position to stabilize. Then tighten the other
pulley adjustment screw
Tie down cables to ensure they do not get caught in the wheels on the elevation
racks.
Indicate Pass/Fail
Series 2000 Treadmill
If Failed, perform the following:
Contact site electrician to correct.
Contact site electrician to correct.
Contact site electrician to correct.
Contact site electrician to correct.
If unit is not level, adjust.
Relocate treadmill.
013
Indicate Pass/Fail
2021403-028A