Hitachi L-2100 Instruction Manual page 58

1 Program number can be from 1 to 9.
2 The contents of the existing program will be deleted.
3 The monitor screen reappears.
1 Program number can be from 1 to 9.
2 For editing, input 0. For generating a new program, input 1.
3 If pump pressure rises beyond the level set here, the pump automatically stops.
4 If pump pressure falls below the level set here, the pump automatically stops.
.
5 Press the key until the step you want to delete appears on the screen. If display
advances beyond that step, press the
key.
6 Press the [DEL] key when the cursor is on the TIME line want to delete.
7 To finish editing, press the [ESC] key. The display should then return to the
monitor screen.
4 - 14