Rear View - Hitachi L-2100 Instruction Manual

Wiring covers
Ground terminals
Pump can start by an
external signal.
Pump can stop by an
external signal.
Fig. 3-2

Rear View

Wiring covers : Upon detaching the left-side cover (as
viewed from the front), the e-Line
connector used for connection between
L-2000 series units appears.
These wiring covers are also usable as
retaining plates for other units of the
L-2000 series.
Ground terminals : Three terminals for grounding the
instrument. I/F board mounting
IF board space : Space for mounting the I/F board required
for connecting the PC (data station) and
HPLC system.
3 - 2
I/F board mounting
space
Wiring covers
Pressure value is output
to the exterior (Approx.
49 MPa)/1 V.
3.1.1