Yamaha ’09 YZF-R1 Kit Manual page 77

Installing the Crankcase
Tightening the bolts
1. Tighten the bolts in the tightening sequence of 1 to 10 to 29.4N•m (3.0kg•m).
2. After loosening the bolts once in the tightening sequence of 1 to 10, retighten them one by
one to 17.6N•m (1.8kg•m).
3. Retighten the bolts in the tightening sequence of 1 to 10 to a turn-of-nut angle of 56° – 61°
(60° at new).
Tightening torque for reference: 35.0N•m (3.5kg•m)
4. Tighten the bolts in the tightening sequence of 11 to 20 to 24±2N•m (2.4±0.2kgf•m).
5. Tighten the bolts in the tightening sequence of 21 to 40 to 10±2N•m (1.0±0.2kgf•m).
TIP
The numbers 1 to 40 show the sequence in which the bolts are tightened.
Apply engine oil to the bolt threads and both sides of the washers.
21
29
7
10
30
31
24
25
23
18
15
5
4
32
33
35
36
39
38
40
These numbers indicate the tightening sequence.
27
11
26
14
12
13
1 3
2 6
34
19
20
37
– 74 –
28
16
17
9
8
22